ADTRAN 1200824G1 Netvanta 3458 Access Router User Guide
NETVANTA 3458 ROUTER
P/N 1200824G1
GETTING STARTED
Two configuration methods are available for your NetVanta router:
•
•
Web-based graphical user interface (GUI)
AOS command line interface (CLI)
The GUI lets you configure the main unit settings and provides online guidance and explanations
for each setting. However, using the AOS CLI may be necessary for more advanced
configurations.
ACCESS THE GUI
You may access the GUI from any Web browser on your network by following these steps:
1. Connect the router to your PC using the ETH 0/1 port on the back of the unit.
2. Set your PC to a fixed IP address of 10.10.10.2. If you cannot change the PC’s IP address,
you will need to change the unit’s IP address using the CLI. (Refer to the next two sections
for instructions.)
3. Enter the unit’s IP address in your browser address line. The default IP address is
10.10.10.1.
4. You will then be prompted for the user name and password (the default settings are admin
and password).
5. The initial GUI screen appears.
ACCESS THE CLI
Access the AOS CLI via the CONSOLE port or a Telnet session. To establish a connection to the
NetVanta router CONSOLE port, you need the following items:
•
•
VT100 terminal or PC (with VT100 terminal emulation software)
Straight-through serial cable with a DB-9 (male) connector on one end and the appropriate
interface for your terminal or PC communication port on the other end
1. Connect the DB-9 (male) connector of your serial cable to the CONSOLE port on the front
panel of the unit.
2. Connect the other end of the serial cable to the terminal or PC.
3. Provide power to the unit as appropriate. Refer to the NetVanta 3000 Series Hardware
Installation Guide (provided on the AOS Documentation CD) for more details.
4. Once the unit is powered up, open a VT100 terminal session using the following settings:
9600 baud, 8 data bits, no parity bits, and 1 stop bit. Press <Enter> to activate the
AOS CLI.
5. Enter enable at the > prompt.
6. Enter the enable password when prompted. The default password is password.
Quick Start Guide, 61200824G1-13A, March 2009
1
| General | Details |
|---|---|
| Name | ADTRAN 1200824G1 Netvanta 3458 Access Router User Guide |
| Make | ADTRAN |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.17 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding ADTRAN 1200824G1 Netvanta 3458 Access Router User Guide, please ask here and describe the problem in detail.
Adtran SDG-8610 Service Delivery Gateway WiFi 6 Gigabit Router Instruction Manual
Adtran 834-5 SDG PlumeOS Dual-Band Wi-Fi 5 Plume Enabled Ethernet Router User Manual
Adtran 854-(v)6 Service Delivery Gateway WiFi 6 2.5G Router User Guide
ADTRAN 17600021F1 834-5 Service Delivery Gateway Wi-Fi 5 Gigabit Router User Guide
devolo 3600 5G LTE Wi-Fi 6 Router User Manual
ASUS RT-ACRH18 Dual band AC WiFi Router User Guide
JUNIPer SSR120 Session Router User Guide
Doonink FW70 WIFI Router User Manual
MikroTik Cloud Hosted Router User Guide
TDS Fiber Internet Wireless Router Instructions
ZLWL ZR2720N Router User Guide
LUXUL XWR-1750 Dual Band Wireless AC1750 Gigabit Router User Guide
THREE CJB74V0HWAAC 4G Plus MiFi Mobile WiFi Router User Guide
airlive XPON ONU Wifi6 MESH Router User Manual