ADVANTECH ICR-2041 LTE Router User Manual
ICR-2041
3. First Use
3.1 Accessories Connection
Before putting the router into operation, it is necessary to connect all the components
required to run your applications; see Chapter 1.3 for the hardware overview. Remember to
insert a SIM card for the cellular connection; see Chapter 2.1.
Do not run the router without antenna connected to the main antenna connector as the
energy from the transmission is effectively reflected by the open end and can damage
the equipment.
3.2 Router Configuration
Initial router configuration can be made via a web browser on your PC. Here you can
perform router monitoring, configuration, and administration.
Connect the power supply to the router, see Chapter 2.4, and the router will boot up.
By default, the router will automatically log on to the default APN of the inserted SIM card.
Configure your PC to get the IP settings automatically from the network. Connect the network
card of your PC to the default router LAN interface, Ethernet port ETH0, and the DHCP server
will assign an IP address to your PC.
Please note that usage of the HTTPS protocol for secure communication over the network is
required.
There is just the root user account created on the router by default. See the product
label on the router for its default password1. Log in to the web interface with the root
user and his password. If logged in successfully, the user will have access to the router web
interface, see Figure 21. See the router configuration manual [1] for a detailed description and
examples of the router configuration.
After logging on to the device for the first time, we strongly recommend changing the
default password due to security reasons.
For security reasons, we recommend regularly updating the router’s firmware to the latest
version. Downgrading the firmware to an older version than the production version or
uploading firmware intended for a different device may cause the device’s malfunction.
All routers have the WebAccess/DMP client pre-installed by default. The activated client
periodically uploads router identifiers and configuration to the WebAccess/DMP server.
See the configuration manual [1], chapter Basic Information -> WebAccess/DMP Config-
uration, for more information.
1Use the password root if the router’s label does not contain a unique password.
22
| General | Details |
|---|---|
| Name | ADVANTECH ICR-2041 LTE Router User Manual |
| Make | Advantech |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.5 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding ADVANTECH ICR-2041 LTE Router User Manual, please ask here and describe the problem in detail.
ADVANTECH ICR-3200 Cellular Router Instruction Manual
ADVANTECH ICR-2701 Engineering Portal Cellular Router User Guide
ADVANTECH ICR-2531 LTE Router User Manual
advantech ICR-3831 RAILWAY 4G LTE ROUTER & GATEWAY User Guide
ADVANTECH SL302 SmartStart LTE Router User Manual
ADVANTECH ICR-2431 LTE Router User Manual
TP-Link AC750 Dual Band Wi-Fi Travel Router Instructions
PIX-LINK LV-WR09 Wireless-N Repeater AP Router Installation Guide
MOXA TN-5916 ToughNet NAT Router Installation Guide
cradlepoint CTR35 Wireless Router User Guide
TP-Link ER706W-4G Omada 4G Cat6 Gigabit VPN Router Instructions
neptronic RPB11 BACnet Router Installation Guide
more FTTP BYO Router Installation Guide
TP-Link Archer BE805 BE19000 Tri-Band Wi-Fi 7 Router User Manual
TP-Link Aginet EX1110 AXE11000 Tri-Band 10G WiFi 6E Router Installation Guide
Harvilon MT6833 5G Portable Wi-Fi Hotspot Esim Router User Guide