ADVANTECH ICR-2041 LTE Router User Manual
ICR-2041
2.2 Antennas
Connect cellular antennas to the router to main (ANT) and diversity (DIV) SMA connectors
on the front panel. Connect WiFi antenna to the WiFi SMA connector on the side of the router.
Only run the router with a cellular antenna connected to the main antenna connector, as
the energy from the transmission is effectively reflected by the open end and can damage
the equipment.
Recommended tightening moment for screwing the antenna to the SMA connectors is 0.9 Nm.
The diversity antenna improves the radio capability of the router at low signal strength.
2.3 Ethernet Interfaces
The maximum length of the cables connected to the Ethernet ports is 30 meters to meet
the EMC immunity conditions.
The panel socket of RJ45 is used for Ethernet interface. The pinout of the socket is shown
in Figure 15 and described in Table 4.
Figure 15: Ethernet Connector Pinout
Signal mark
Description
Pin
1
Tx+
Tx-
Rx+
—
Transmit Data+ (positive pole)
Transmit Data- (negative pole)
2
Receive Data+ (positive pole)
3
—
4
—
—
5
Rx-
—
Receive Data- (negative pole)
6
—
—
7
—
8
Table 4: Ethernet Connector Pinout Description
The isolation barrier of the Ethernet ports against the ground is 1500 V.
17
| General | Details |
|---|---|
| Name | ADVANTECH ICR-2041 LTE Router User Manual |
| Make | Advantech |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.5 MB |
If you have any questions regarding ADVANTECH ICR-2041 LTE Router User Manual, please ask here and describe the problem in detail.

ADVANTECH ICR-3200 Cellular Router Instruction Manual

ADVANTECH ICR-2701 Engineering Portal Cellular Router User Guide

ADVANTECH ICR-2531 LTE Router User Manual

advantech ICR-3831 RAILWAY 4G LTE ROUTER & GATEWAY User Guide

ADVANTECH SL302 SmartStart LTE Router User Manual

ADVANTECH ICR-2431 LTE Router User Manual






















































