ADVANTECH ICR-2041 LTE Router User Manual
ICR-2041
2.4 Power Supply
The pins of power supply are physically connected to the 6-pin terminal block panel socket
located on the left panel. The connection of power supply is shown in Figure 16 and described
in Table 5.
Figure 16: Connection of Power Supply
Signal mark
PWR(+)
Description
Pin
1
Positive pole of DC supply voltage (+9 to +48 V DC)
Negative pole of DC supply voltage
Table 5: Power Supply Pinout
PWR(-)
2
Required power supply voltage for the router is between +9 V and +48 V DC, see the
connection scheme on Figure 16. Protection against reversed polarity without signaling is
built into the router. For correct operation it is necessary that the power source is able to
supply a peak current of 1 A.
Unit has to be supplied by a power supply specified as a Limited Power Source (LPS) or
CEC/NEC Class 2 source of supply.
The metal case of the router is not connected to the negative pole of the power sup-
ply (common pole). If recommended for the installation environment, protect the router by
grounding it properly by the grounding screw, see Figure 17.
Figure 17: Position of the Grounding Screw
18
| General | Details |
|---|---|
| Name | ADVANTECH ICR-2041 LTE Router User Manual |
| Make | Advantech |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.5 MB |
If you have any questions regarding ADVANTECH ICR-2041 LTE Router User Manual, please ask here and describe the problem in detail.

ADVANTECH ICR-3200 Cellular Router Instruction Manual

ADVANTECH ICR-2701 Engineering Portal Cellular Router User Guide

ADVANTECH ICR-2531 LTE Router User Manual

advantech ICR-3831 RAILWAY 4G LTE ROUTER & GATEWAY User Guide

ADVANTECH SL302 SmartStart LTE Router User Manual

ADVANTECH ICR-2431 LTE Router User Manual






















































