Home > Amped Wireless > amped wireless R10000G High Power Wireless N 600mW Gigabit Router User Guide

amped wireless R10000G High Power Wireless N 600mW Gigabit Router User Guide

1

2

This is the second page of the Setup Guide. Start on the opposite side first.

LED Indicator Information

(From top to bottom)

Power: Indicates when the High Power Router is powered on. The LED will remain on.

Wireless Activity: Blinks rapidly when wireless data traffic is transmitted or received over

the wireless network.

Wired Ports 1-4: Indicates when a networking device is connected to a wired port on the

back of the High Power Router. The LED blinks rapidly when wired data traffic is

transmitted or received.

Internet Connection: Indicates when the High Power Router is connected to a broadband

modem. The LED will blink when Internet traffic is transmitted or received.

WPS: Wi-Fi Protected Setup activity. When the WPS mode is activated, the WPS LED blinks

as it awaits a connection.

How to Connect Wirelessly to the High Power Router:

Windows 7 and Vista

A. Click on the Wireless icon to see available

wireless networks (For Vista, click Start >

Connect To). Select the "Amped_R10000G"

network and click Connect.

B. When prompted, enter the wireless

security key “wireless” and click OK.

Wireless Network

AWmirpeelde_ssR1N0e0tw00oGrk

Mac OS X

A. Click on the Wireless icon to see available

wireless networks. Select the "Amped_R10000G"

network and click Connect.

B. When prompted, enter the wireless

security key “wireless” and click OK.

Amped_R10000G

iPad Tablet

A. Tap the “Home” button to get to the home page.

B. Tap the “Settings” app icon.

C. Tap on Wi-Fi to enter the iPad’s Wi-Fi settings.

D. Touch the “On/Off” selector switch to “On”

E. Under “Choose a Network” select: “Amped_R10000G”

F. When prompted, enter the wireless security key:

“wireless”

Amped_R10000G

Android Tablet

A. Tap the “Apps” menu on the tablet screen.

B. Locate and tap the “Settings” app icon.

C. Under “Wireless & Networks” tap “Wi-Fi settings”

D. Tap the Wi-Fi box to turn on Wi-Fi and scan.

E. Under “Wi-Fi Networks” select: “Amped_R10000G”

F. When prompted, enter the Password key: “wireless”

Amped_R10000G

Wi-Fi Protected Setup (One-Touch Setup or Push Button Configuration)

If your Wi-Fi device has WPS one-touch setup you can use it to connect to the High Power Router:

A. Hold down the WPS button on the High Power Router (back panel) for 3 seconds.

The WPS LED will begin to blink.

B. As it blinks, push the WPS button on your wireless adapter or enable WPS with the provided

software for your wireless adapter. WPS will automatically configure the connection settings

for your wireless adapter to connect to the High Power Router.

Setting a Login and Password

The High Power Router has a default login

and password to access the web menu:

admin

PASSWORD:

This login/password is NOT the wireless network key used to connect to your wireless network.

It is strongly recommended that you change

these settings and select your own personal

be accessed through the web menu under

More Settings > Management > Password

on the left side of the web menu.

If you forget your login and password, you will need to reset the High Power Router back to default settings

and use the default login and password (login: admin, password: admin) to access the web menu. View the

instructions below on how to reset your High Power Router back to default settings.

Using the Features on the High Power Router

The High Power Router is equipped with many powerful security features which can be accessed

through the web menu under Smart Features, Firewall Settings and Quality of Service on the left

side of the web menu:

Wireless Access Scheduling

12:26

Control when your Wi-Fi is on/off

Menu Location: Smart Features > Access Schedule

User Access Control (Mac/IP)

Restrict network access to specific users

Menu Location: Smart Features > User Access

Wireless Coverage Control

Adjust the distance of your wireless network

Menu Location: Smart Features > Wireless Coverage

Block Websites

www

Prevent access to specific websites

Menu Location: Smart Features > Block Websites

Firewall Settings

Protect your network from outside intruders

Menu Location: Firewall Settings

Quality of Service (Prioritize Bandwidth)

Web Menu (Left Side)

Manage your network bandwidth

Menu Location: Quality of Service

If you are unfamiliar or want more information on how to set up Smart Features, Firewall

Settings, Quality of Service, please refer to the User’s Guide on the included CD.

How to Reset the High Power Router to Default Settings

There are two options to reset the High Power Router back to factory default settings:

Access the Reset button through the web menu under More Settings > Management >

Save/Reload Settings on the left side of the web menu. Select the Reset Settings to Default.

Access the physical Reset Button on the back panel of the High Power Router:

Hold down the Reset Button for five to ten (5-10) seconds. You may need to use a pen tip or pin

to access the button. Pressing the Reset Button for less than five (5) seconds will simply reboot

the High Power Router while saving your existing settings.

Troubleshooting Tips

PROBLEM:

I entered setup.ampedwireless.com and it failed to open the Web Menu.

a. Make sure your computer is connected to the High Power Router using the included Ethernet cable.

Ensure that the power on the High Power Router is on.

SOLUTIONS:

b. Check that your computer IS NOT connected to any wireless networks. If it is, disable your Wi-Fi connection

and disconnect from all wireless networks. Reboot the router and try again.

c. Close your current web browser and reopen it. Use Google Chrome or Internet Explorer (8.0 and up)

d. Open your web browser and enter 192.168.3.1 into the web address bar.

e. Reset the High Power Router to default settings by holding the Reset Button (located on the back panel) for

ten (10) seconds and try again.

PROBLEM: I am having problems with features on the Web Menu. When clicking buttons, it does not register my action.

a. Check that you are using a supported web browser: Google Chrome, Internet Explorer (8.0 and up) and Safari.

If you are using an unsupported web browser, such as Firefox, please change to one of the supported web

browsers and try again.

SOLUTIONS:

I have a DSL connection and I am not able to access the Internet through the High Power Router.

PROBLEM:

a. Your Internet provider may require that you enter your login information to access the Internet. To enter

your information, go to Manual Configuration from the Smart Setup Wizard and access the PPPoE menu

from the dropdown menu. Enter the required login information for your Internet provider.

SOLUTIONS:

The Smart Setup Wizard could not automatically configure my Internet connection.

PROBLEM:

a. Reset your Modem by holding down the reset button located on the back of the Modem for approximately

5 seconds. Try again.

SOLUTIONS:

b. Reboot the High Power Router by unplugging the power adapter and plugging it back in.

c. Static IP: Your Internet connection may require a static IP setting. Check with your ISP to obtain the IP settings.

d. DSL Connection: Your Internet connection may require login information. If you are using PPPoE mode,

you will need to manually configure your Internet connection settings and obtain your username and password.

e. Cable Modem: Your Internet connection may require you to Clone your MAC address. Go to More Settings >

IP Settings > Internet Network (WAN) and select Automatic/Dynamic (DHCP) from the dropdown menu.

Clone your PC’s MAC address under the DNS settings.

PROBLEM:

I am not getting maximum signal strength on my wireless signal display when connecting to the High Power Router.

a. Step back at least 10 feet from the High Power Router and check your signal again. The High Power Router

emits high power, long range Wi-Fi signals that may confuse your wireless adapter signal reading at close

range. The speed and signal are at 100%, however, your wireless network adapter readout may not be

displaying correctly.

SOLUTIONS:

b. Change the wireless channel on the High Power Router to 11 or 1 and try again. There may be wireless

interference in your installation environment.

PROBLEM:

My computer is getting an IP address of 169.254.x.x and/or Windows networking says I have “Limited or no

Connectivity.”

a. Make sure the High Power Router is powered on.

SOLUTIONS:

b. Check that your computer’s network adapter is enabled and is set to “Obtain IP Address Automatically”

c. Restart your computer and try again.

d. You may have a faulty network port. Try connecting to the High Power Router from another computer or

using the wireless connection on your computer, if possible.

If you continue to have issues setting up the High Power Router, give us a call — we’re here to help: 888-573-8820

Visit our website for more support information and answers to frequently asked questions: www.ampedwireless.com/support

Amped Wireless

A Division of Newo Corporation

Amped Wireless, Newo Corporation, the Amped Wireless Logo are registered trademarks or trademarks of Newo Corporation.

https://manual-hub.com/

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	amped wireless R10000G High Power Wireless N 600mW Gigabit Router User Guide
Make	Amped Wireless
Language	English
Filetype	PDF (Download)
File size	0.6 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Questions and Answers (0)

If you have any questions regarding amped wireless R10000G High Power Wireless N 600mW Gigabit Router User Guide, please ask here and describe the problem in detail.