Bauer 23121E-B Variable Speed Compact Router Owner’s Manual

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

circle cutting  

Use the center hole in the Fence as a  

pivot point when cutting circles.  

1. Install Fence according to Set Up  

Temporary Guide on page 9.  

2. Loosen Fence Knob, set distance from center hole  

in Fence to far edge of bit, equal to radius of circle.  

edge Guide  

3. Tighten Fence Knob.  

Knob  

4. Align center hole in Fence with center point of circle.  

center  

Hole  

Fence  

Knob  

5. Drive a nail through center hole  

to secure Fence in place.  

edge  

Guide  

Fence  

adjusting cutting Depth  

Set the depth of cut using the scale  

marked on the side of the Router.  

3. The Depth Scale indicates starting position.  

Starting position will vary depending on bit used.  

1. Open Lock Lever, then turn Depth Adjustment Knob  

until bit is retracted within Base.  

4. Add desired depth of cut to starting  

position. Example: If starting position  

is 1/2" and desired depth of cut is 1/4",  

correct adjustment on the scale is 3/4".  

2. Place Base on a flat surface, then slide  

Motor down in Base until tip of bit contacts  

workpiece. Close Lock Lever.  

5. Open Lock Lever, then use Depth Adjustment Knob  

to move Motor up until scale shows correct  

reading; in this example 3/4″. Close Lock Lever.  

Workpiece and Work area Set up  

1. Designate a work area that is clean and well lit.  

The work area must not allow access by children  

or pets to prevent distraction and injury.  

3. Secure loose workpieces using a vise or clamps  

(not included) to prevent movement while working.  

4. There must not be objects, such as utility lines,  

nearby that will present a hazard while working.  

2. Route the power cord along a safe route to reach  

the work area without creating a tripping hazard or  

exposing the power cord to possible damage. The  

power cord must reach the work area with enough  

extra length to allow free movement while working.  

5. Make sure there are no metal objects in the  

wood which might make contact with the bit.  

6. Refer to maximum cutting depth in  

Specifications on page 7.  

Page 10  

For technical questions, please call 1-888-866-5797.  

Item 58253  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Bauer 23121E-B Variable Speed Compact Router Owner’s Manual
Make	BAUER
Language	English
Filetype	PDF (Download)
File size	1.09 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• BAUER

Questions and Answers (0)

If you have any questions regarding Bauer 23121E-B Variable Speed Compact Router Owner’s Manual, please ask here and describe the problem in detail.