Bauer 23121E-B Variable Speed Compact Router Owner’s Manual

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

Operating instructions  

read the entire iMpOrtant SaFety inFOrMatiOn section at the beginning of this  

manual including all text under subheadings therein before set up or use of this product.  

tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn:  

Make sure that the power Switch is in the off-position and unplug the tool from  

its electrical outlet before performing any procedure in this section.  

tool changing  

Bit installation  

WarninG! tO preVent SeriOuS inJury:  

Use only rotary cutting bits of the correct shank  

diameter for the collet mounted. Use only rotary  

cutting bits suitable for the speed of the tool.  

3. Press and hold Spindle Lock.  

4. Using Large Wrench, turn Collet counterclockwise  

to loosen, but do not remove.  

5. Insert shank end into Collet as far as it  

will go, then pull up slightly so there is a  

minimum 1/16" gap at bottom of bit.  

WarninG! tO preVent SeriOuS inJury:  

Carefully inspect router bits for cracks, chips, or  

other damage before installing. Do not use bits  

that have been dropped, cracked, or damaged.  

The bit may shatter causing serious injury.  

6. Secure bit in Collet using either  

of the following methods:  

1. Use only bits (sold separately) with 1/4" shank size,  

that are marked as suitable for the type of material  

being cut, and are marked with a speed equal or  

higher than the maximum speed marked on the tool.  

Do not use a bit with a cutting diameter  

a. Hold Spindle Lock in and tighten  

Collet Nut with Large Wrench.  

b. Place Small Wrench on Spindle and Large  

Wrench on Collet Nut, then tighten Collet Nut.  

larger than the opening in the base.  

7. Replace Base on Motor and close Lock Lever.  

2. Turn Router upside down, open Lock  

Lever and remove Base.  

edge Guide installation  

Use the Edge Guide to make cuts parallel  

to the edge of a workpiece, or following a  

guide clamped onto the workpiece.  

1. Loosen Edge Guide Knob, then install Edge  

Guide with Fence facing inward and down.  

2. Tighten Edge Guide Knob securely.  

edge Guide  

3. Loosen Fence Knob, adjust  

Fence, then tighten Knob.  

Knob  

Fence  

Fence  

Knob  

Page 8  

For technical questions, please call 1-888-866-5797.  

Item 58253  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Bauer 23121E-B Variable Speed Compact Router Owner’s Manual
Make	BAUER
Language	English
Filetype	PDF (Download)
File size	1.09 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• BAUER

Questions and Answers (0)

If you have any questions regarding Bauer 23121E-B Variable Speed Compact Router Owner’s Manual, please ask here and describe the problem in detail.