BEC AirConnect 8112 5G Enterprise Router User Guide
BEC AirConnect® 8112 5G Enterprise Router
Troubleshooting
1. None of the LEDs are on when you turn on the router.
Check the connection between the adapter and the router. If the error persists, you may have a hardware
problem. In this case you should contact technical support.
2. You have forgotten your router login and/or password.
Try the default login and password, please refer to User Manual. If this fails, you can restore your router
to its factory settings by holding the Reset button on the back of your router for 6 seconds or more.
3. Cannot ping any PCs on the LAN.
Check the Ethernet LEDs on the front panel. The LED should be on for a port that has a PC connected. If
it is off, check the cables between your router and the PC. Make sure you have uninstalled any software
firewall for troubleshooting. Verify that the IP address and the subnet mask are consistent between the
router and the workstations.
Product Support and Contact Information
Most problems can be solved by referring to the Troubleshooting section in the User Manual.
If you have other inquiries or need further technical support, please contact with your Internet
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment. This device and its antenna(s) must
not be co-located or operating in conjunction with any other antenna or transmitter.
V1.1
9
| General | Details |
|---|---|
| Name | BEC AirConnect 8112 5G Enterprise Router User Guide |
| Make | BEC |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.89 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding BEC AirConnect 8112 5G Enterprise Router User Guide, please ask here and describe the problem in detail.
BEC MX-241NP 4G LTE CBRS Wi-Fi Router User Guide
BEC 7000 R26-W Gigabit LTE Outdoor Router with Hotspot User Guide
BEC RidgeWave 7000 R26 MaxRange Gigabit LTE Outdoor Router Owner’s Manual
Roam-ON R10 MiFi 4G LTE WiFi Mobile Hotspot Router User Manual
Wistron NeWeb XIONEWN Router User Manual
KuWFi CF5 4G LTE CPE Router User Manual
TP-Link 7106511948 Outdoor Router Installation Guide
SENWA VOLTE 2AZYA 4G LTE CPE Router User Manual
hyperoptic EX3301 Hyperhub Router Instruction Manual
TP-Link M7350 4G LTE Mobile Wi-Fi Router Installation Guide
TP-Link AC1200 Dual Band Wi-Fi Router Installation Guide
westermo Merlin 4700 Series VDSL Cellular Router User Guide
BROWAN COMMUNICATIONS INCORPORATION MI14 Wi-Fi 6 AX3000 Dual-Radio Router User Guide