4. Interface(Description → Connect To Wireless Network Card → Indicators → Power Jack → Lcd Screen)
5. Screen Logo Instruction(Power On The Device First, Waiting Bonding For 2~5 Minutes. → Ip Address Will Be Seen After Successful Bonding. → No.1 Usb Port: Disconnect To Network; → No.1 Usb Port: Connect To Network; → Signal Value:0%~5% → Signal Value:25%~50% → Signal Value:50%~75% → Signal Value:75%~100% → Ethernet Port: Connect To Network Via Network Cable And Be Bonding. → Battery Level (once Optional Battery Installed))
6. How To Config(Step 1: Directly Connect A Laptop To The Bond Router Via Lan Cable. The Bond Router Has A Dhcp Server And Will Provide An Ip Address To A Connected Laptop That Is Set For Default (dhcp) Network Configuration. → Step 2: Check Network Settings In The Laptop To Confirm Ip Address Is In The Same Subnet As The Bond Router - 192.168.100.xxx. → Step 3: Open A Browser Window And Enter 192.168.100.1 In The Address Bar. This Ip Address Is Default, Preset Ip Address Of The Bond Router. → Step 4: Plug Dongles With Sim Card Inside To Usb Port And Then Directly Connect Tao 1pro To The Bond Router Via Lan Cable As Shown Below.)
9. How To Apply(Connect Tao 1pro To The Router Via Lan Port → Wiring Diagram → Step 1: Plug A Dongle With Sim Card → Step 2: Directly Connect Tao 1pro To The Bond Router → Step 3: Press The Power Switch → Step 4: Check Network Settings In The Lcd Screen)
Loading...
