D-Link DIR-836L Wireless N750 Dual Band Gigabit Router Installation Guide
Quick Install Guide
Package Contents
LEDs (from top to bottom)
Power LED - A solid green light indicates
a proper connection to the power supply.
The light will blink green during the WPS
process. The light will be solid orange during
boot up.
DIR-836L Wireless N750 Dual
Band Gigabit Router
Power Adapter
Wireless N750
Dual Band Gigabit Router
Cloud Router 2500
Internet LED - A solid light indicates
connection on the Internet port. If the LED
is orange, the connection is good but the
router cannot connect to the Internet.
Ethernet Cable
If any of the above items are missing, please contact your reseller.
to download the user manual.
DIR-836L
Start Here
Tips for PPPoE and USB connections:
To configure your router, go to the Manual Setup Section below and
follow the steps.
If you have DSL and are connecting via PPPoE, make sure that you disable or uninstall any PPPoE
software such asWinPoet, Broadjump, or Enternet 300 from your computer or you will not be able
to connect to the Internet.
You can only use the Ethernet port on your modem. If you were using USB to connect before, then
you must turn off your modem, disconnect the USB cable and connect an Ethernet cable to the
Internet port on the router, then turn the modem back on. In some cases, you may need to call
your ISP to change connection types (USB to Ethernet).
Important for Manual Setup: For the quick setup wizard to work properly, you
must have a working Internet connection. Ensure that you are able to use your
computer to get on the Internet before disconnecting your computer from your
modem.
Manual Setup
Computer
2
3
4
1
USB
Router
WPS
Router
1
2
USB
WPS
Modem
3
Modem
1
2
3
4
USB
4
WPS
INTERNET
1
2
3
4
POWER
INTERNET
5V 2.5A
INTERNET
INTERNET
POWER
INTERNET
5V 2.5A
Router
POWER
5V 2.5A
Modem
Computer
Computer
Turn off and unplug your cable or DSL
broadband modem.
Position your router close to your modem and a computer.
Place the router in an open area of your intended work area
for better wireless coverage.
Unplug the Ethernet cable from your modem (or
existing router if upgrading) that is connected to your
computer. Plug it into the black port labeled 1 on the
back of your router. The router is now connected to your
computer.
Plug one end of the included blue Ethernet cable that came with your
router into the yellow port labeled INTERNET on the back of the router.
Plug the other end of this cable into the Ethernet port on your modem.
7
5
6
8
Computer
Laptop
Computer
Modem
Router
Modem
USB
Modem
USB
WPS
WPS
1
1
2
3
4
2
INTERNET
INTERNET
INTERNET
3
4
INTERNET
INTERNET
POWER
POWER
V 2.5A
2.5A
DIR-836L Router
When the Welcome screen appears, click Next to continue
and follow the Setup Wizard to configure your router. Please
refer to the user manual for more detailed installation
information and advanced features.
Connect the supplied power adapter into the power port on
the back of the router and then plug it into a power outlet
or surge protector. Press the power button and verify if the
power LED is lit.
Reconnect the power adapter to your
cable or DSL broadband modem and wait
for two minutes.
This is a sample network configuration of the setup after you have
completed all the setup steps.
©2012 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link
Corporation or its subsidiaries in the United States and/or other countries. Other trademarks or registered trademarks are the
property of their respective owners. Maximum wireless signal rate derived from IEEE Standard 802.11n and 802.11g specifications.
Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building
materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely
affect wireless signal range. Product specifications, size and shape are subject to change without notice, and actual product
appearance may differ from that depicted on the package. Visit dlink.com (US) or dlink.ca (Canada) for more details. iPhone, iPad,
and iPod touch are registered trademarks of Apple Inc.
Technical Support
If you experience issues registering this Router with your mydlink account, try
performing a hard reset by using an unfolded paperclip to press and hold the reset
button for 10 seconds while the Router is powered on. This may be necessary if
you have purchased an open box or resold unit.
United States
Telephone: (877) 453-5465
Canada
Telephone: (800) 361-5265
Version 1.1 (October 17, 2012)
U.S. and Canadian customers can contact D-Link technical support through our web site or by
phone. You can find software updates and user documentation on the D-Link website as well
as frequently asked questions and answers to technical issues.
Before you contact technical support, please have the following ready:
• Model number of the product (e.g. DIR-836L)
• Hardware Revision (located on the label on the bottom of the product (e.g. rev A1))
• Serial Number (s/n number located on the label on the bottom of the product).
| General | Details |
|---|---|
| Name | D-Link DIR-836L Wireless N750 Dual Band Gigabit Router Installation Guide |
| Make | D-Link |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.28 MB |
If you have any questions regarding D-Link DIR-836L Wireless N750 Dual Band Gigabit Router Installation Guide, please ask here and describe the problem in detail.

D-Link BE3600 Mesh Gigabit Wireless Router Installation Guide

D-Link DBR-700 Router Installation Guide

D Link DIR-822 AC1200 WiFi Router User Guide

D-Link DIR-2660 AC2600 Mesh Wifi Router Installation Guide

D-Link EXO AX AX1800 Wi-Fi Router User Guide

D-Link N300 4G Router User Guide

D-Link M60 AX6000 Wi-Fi 6 Mesh Router Installation Guide

D-Link AX3200 Router Owner’s Manual

D-Link M30 2-pack Mesh Router User Guide

D-Link M30 AQUILA PRO AI AX3000 Wi-Fi 6 Mesh Router User Manual














