Digital Alert Systems R232 Multi Port RF Router Installation Guide

1

2

3

4

5

6

7

8

The R232 ships with a right-angle IEC power cable similar to  

the one shown on the right.  

The plug is inserted in the AC receptacle on in the Pocket  

Power Supply opening and the wire is routed along the cable  

management tray as shown in Figure 5.  

Figure 5: R232 side view with AC power cord installed and properly configured.  

2.1.2 R232-48VDC Power Connections - DC  

The model R232-48VDC uses a different connector in the Pocket Power Supply  

opening. This connector is a two-pin removeable terminal block where one side  

remains mounted to the chassis as shown in Figure 6, while the mating connector  

can be easily removed to facilitate installation of the power cabling.  

IMPORTANT NOTE:  

CLOSELY OBSERVE THE CONNECTION POLARITY TO AVOID DAMAGE!  

Figure 6: R232-48VDC Pocket Power Supply with removeable terminal receptacle for DC input  

(shown with mating connector removed)  

Along the same side of the chassis is the power cable management tray which  

allows the power cable to be cleanly supported toward the rear of the chassis.  

The R232-48VDC is not supplied with any power wiring. This is the sole  

responsibility of the customer. The terminal strip can accept wires up to 16 gauge.  

R232 / R232-48VDC Installation Guide  

Page 5 of 8  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Digital Alert Systems R232 Multi Port RF Router Installation Guide
Make	Digital Alert Systems
Language	English
Filetype	PDF (Download)
File size	0.36 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• Digital Alert Systems

Questions and Answers (0)

If you have any questions regarding Digital Alert Systems R232 Multi Port RF Router Installation Guide, please ask here and describe the problem in detail.