Digital Alert Systems R232 Multi Port RF Router Installation Guide

1

2

3

4

5

6

7

8

This document is intended to provide a brief product installation guideline. For more  

information on using and controlling the devices please refer to the document  

“Monroe X-point Control Protocol MXCP™ R232 MultiPort RF Router  

Operation/Interface Manual” which describes the data connection and interface  

parameters for each type of interface.  

2 Power Connections  

As mentioned above the R232 and R232-48VDC differ by their respective power  

supplies and therefore have different connection types reflective of the input style.  

Although the inputs differ the connection points and cable arrangements are the  

same.  

Both models feature the patented Pocket Power Supply™ which is a unique opening  

on the right side of the chassis (facing the front) for power input. This is shown in  

Figure 3 below.  

Figure 3: Position of Pocket Power Supply opening.  

Along the same side of the chassis is the power cable management tray, this allows  

the power cable to be cleanly supported along the edge and toward the rear of the  

chassis.  

2.1.1 R232 Power Connections - AC  

The in the pocket power supply of the model R232 is an International  

Electrotechnical Commission (IEC) standard receptacle as shown in Figure 4 below.  

Figure 4: R232 Pocket Power Supply with IEC receptacle for AC input.  

R232 / R232-48VDC Installation Guide  

Page 4 of 8  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Digital Alert Systems R232 Multi Port RF Router Installation Guide
Make	Digital Alert Systems
Language	English
Filetype	PDF (Download)
File size	0.36 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• Digital Alert Systems

Questions and Answers (0)

If you have any questions regarding Digital Alert Systems R232 Multi Port RF Router Installation Guide, please ask here and describe the problem in detail.