Digital Alert Systems R232 Multi Port RF Router Installation Guide

1

2

3

4

5

6

7

8

The 1.75” (4.45cm) high chassis fills a uniform one rack unit (RU) in height.  

IMPORTANT NOTE:  

There can be a tremendous amount of weight applied to the face plate when the unit  

is fully cabled. Users are encouraged to provide a means of cable management at  

the rear of the rack to avoid excessive cable weight force on the unit.  

Because the device consumes very little power (<25 Watts) there are no venting  

restrictions. This allows stacking devices without the need or provision for spacing in  

between units.  

4 Test Cable Wiring  

Much like the internal circuitry, the R232’s input and output connectors are a  

precision component and must be treated as such. Therefore, it is critical that NO  

EXCESSIVE FORCE BE APPLIED TO THE INPUT/OUTPUT CONNECTORS.  

CRITICAL NOTE:  

Do not exceed 10 in/lbs. (1.12 N/m) of torque on any F-connector!  

OVER TORQUING THE CONNECTORS MAY CAUSE IRREPARABLE INTERNAL  

DAMAGE AND IS NOT COVERED UNDER WARRANTY!  

Please be aware that generally available cable F-connector torque wrenches are  

typically set for 20 in/lbs. used for outdoor connectors. Moreover, they are  

notoriously unreliable in delivering proper torque for these precision components and  

therefore it is strongly advised not to use them in this application.  

4.1 F-Connection Rule of Thumb:  

Finger tighten the cable to the F-connector, then tighten no more than a quarter (1/4)  

turn if at all. This should provide a secure connection without applying a damaging  

amount of torque to the connector.  

R232 / R232-48VDC Installation Guide  

Page 7 of 8  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Digital Alert Systems R232 Multi Port RF Router Installation Guide
Make	Digital Alert Systems
Language	English
Filetype	PDF (Download)
File size	0.36 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• Digital Alert Systems

Questions and Answers (0)

If you have any questions regarding Digital Alert Systems R232 Multi Port RF Router Installation Guide, please ask here and describe the problem in detail.