Digital Alert Systems R232 Multi Port RF Router Installation Guide

1

2

3

4

5

6

7

8

Once the wires are attached to the removable terminal strip it can be connected to  

the mating connector in the Pocket Power Supply opening. There are two retention  

screws on the terminal strip to secure the connector to the device.  

The wires can then be routed along the power cable management tray and toward  

the rear of the chassis. The completed connection and wire routing can be seen in  

Figure 7 below.  

Figure 7: R232-48VDC side view with DC power cabling installed and properly configured.  

Once power connections are made the unit is ready for mounting.  

3 Mounting  

The R232 is designed to be mounted in a standard Electronic Industries Alliance  

(EIA) 19” rack frame using the four mounting screw holes on the front of the chassis.  

The 1.75” high chassis is a uniform one rack unit (RU) height.  

Figure 8: Front panel mounting holes  

The 1.75” (4.45cm) high chassis fills a uniform one rack unit (RU) in height.  

Figure 9: R232 rear panel layouts  

R232 / R232-48VDC Installation Guide  

Page 6 of 8  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Digital Alert Systems R232 Multi Port RF Router Installation Guide
Make	Digital Alert Systems
Language	English
Filetype	PDF (Download)
File size	0.36 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• Digital Alert Systems

Questions and Answers (0)

If you have any questions regarding Digital Alert Systems R232 Multi Port RF Router Installation Guide, please ask here and describe the problem in detail.