EDIMAX BR-6428NS V5 4 in 1 N300 WiFi Router Installation Guide

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

Troubleshooting  

1. The System LED does not light up.  

a. Make sure that the Router Adapter is properly plugged into a power outlet.  

b. Make sure the power outlet is active (working) by plugging another electric  

device into it.  

c. Re-plug the Router Adapter to the power outlet. If the system LED is still failed  

to light up, contact your local dealer for technical support.  

2. The WAN LED does not light up.  

a. Make sure that the Ethernet cable (RJ-45) is properly connected to the Router  

Adapter’s Ethernet port.  

b. Make sure that the other end of the Ethernet cable (RJ-45) is properly  

connected to the computer LAN card or to you Cable/xDSL Ethernet port.  

c. Make sure your computer LAN card is properly installed and configured.  

d. Make sure your Cable/xDSL broadband access is working and configured  

correctly.  

e. Contact your local dealer for technical support if the Ethernet LED is still failed to  

light up after the above procedures.  

3. I can’t access the Internet.  

a. Ensure that all cables are connected properly. Try a different Ethernet cable.  

b. Check if you can access the web based configuration interface. If not, please  

ensure your computer is set to use a dynamic IP address. Refer to the user  

manual for guidance if you are unsure how to do this.  

c. Login to the web based configuration interface and go to Internet > WAN Setup  

and check that the connection type is correct. If you are unsure which internet  

connection type you have, please contact your Internet Service Provider (ISP).  

d. Connect your computer directly to your modem and check if you can access the  

internet. If you can’t, please contact your Internet service provider for  

assistance.  

4. I can’t open the web based configuration interface.  

a. Please ensure your computer is set to use a dynamic IP address. Refer to the  

user manual for guidance if you are unsure how to do this.  

5. How do I reset my device to factory default settings?  

a. To reset the device back to its factory default settings, press and hold the  

WPS/Reset button for over 10 seconds, until the power LED begins to flash.  

Please wait a few minutes for the product to restart. When the device restarts,  

all settings will be reset. Default settings are displayed on the product label on  

the back of the device.  

6

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	EDIMAX BR-6428NS V5 4 in 1 N300 WiFi Router Installation Guide
Make	EDIMAX
Language	English
Filetype	PDF (Download)
File size	0.74 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• EDIMAX

Questions and Answers (0)

If you have any questions regarding EDIMAX BR-6428NS V5 4 in 1 N300 WiFi Router Installation Guide, please ask here and describe the problem in detail.