EWON EC71330 Cosy 131 Ethernet router Installation Guide
16 (24)
6
Troubleshooting
6.1
Normal Boot Process
The normal boot process of the Ewon Cosy+ takes approximately 1m30 to 2 minutes to complete.
During this process, all LEDs are first shortly on (except BI1) then only the PWR LED stays steady
green.
As soon as the boot process is completed and the unit is ready to be used, the USR LED blinks
green slowly whereas others might be steady green (if the device is connected to Internet,
Talk2M...).
6.2
Resetting the Ewon Cosy+
this button is active only if pressed while powering on.
The Ewon Cosy+ features two levels of reset:
6.2.1
First Reset Level: User Reset
The first reset level is a selective reset that erases the user files part and the system settings. This
type of reset does not alter the communication parameters of the Ewon Cosy+.
Hereunder is the process to perform a first reset level:
•
•
•
Power off the unit.
While powering it on, press & maintain the reset button. The LED labeled BI1 turns green.
Keep the reset button pressed for approximately 30 seconds until the USR LED blinks red 1x
per second. If it isn’t released at that specific moment, a second level reset phase is initiated.
The LED labeled BI1 turns off.
•
•
Wait approximately 30 seconds until the reset process is completed.
The Cosy+ automatically restarts and the unit is ready to be used, the USR LED blinks green
slowly (this entire step takes approximately 2 minutes).
6.2.2
Second Reset Level: Factory Reset
The second level reset restores the Cosy+ to its factory settings. This operation consists in 3
steps:
•
•
•
Format the entire non volatile memory, including all COM parameters and IP addresses
Full hardware auto-test with result shown by the USR LED
Return to ex-factory configuration (default configuration)
Hereunder is the process to perform a second reset level:
•
•
•
Power off the unit.
While powering it on, press & maintain the reset button. The LED labeled BI1 turns green.
Keep the reset button pressed for approximately 35 seconds until the USR LED remains red
steady.
•
•
When this state is reached, release the button. The LED labeled BI1 turns off.
Check if the auto test is successful, the USR LED blinks red with a pattern of 200ms on and
800ms off. The Cosy+ does NOT restart by itself in normal mode and remains running in this
diagnostic mode.
IG-0031-00 1.1 en-US
Ewon Cosy+ Installation Guide
| General | Details |
|---|---|
| Name | EWON EC71330 Cosy 131 Ethernet router Installation Guide |
| Make | EWON |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.42 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding EWON EC71330 Cosy 131 Ethernet router Installation Guide, please ask here and describe the problem in detail.
D-Link DWR-930M 4G LTE Mobile Router Installation Guide
Quwireless Digi IX10 5G Antenna for Router Installation Guide
Pix-Link AX02 Wi-Fi 6 Router Installation Guide
MILLITRONIC MG360 Wireless WiGig Router User Manual
HUAWEI WiFi Mesh 7 Tri-Band Router User Guide
STARLINK 02633101 Gen 3 Wi-Fi Router User Guide
BIGXI AX1800 Wireless Router Installation Guide
NETGEAR MR6450 Nighthawk M6 5G Wi-Fi 6 Mobile Router User Guide
Cudy LT18 4G LTE Dual Band WiFi 6 Gigabit Cellular Hotspot Router Installation Guide
Cudy LT500D 4G AC1200 Wi-Fi Router Installation Guide