Home > EWON > EWON EC71330 Cosy 131 Ethernet router Installation Guide

EWON EC71330 Cosy 131 Ethernet router Installation Guide

14 (24)  
5
IP Address & Access to the Web Configuration  
5.1  
Factory Default IP Settings  
Characteristics  
LAN IP address  
LAN subnet mask  
Gateway  
Values  
10.0.0.53  
255.255.255.0  
0.0.0.0  
The WAN IP address is set by default in DHCP mode.  
5.2  
Powering On  
Power on the unit and wait approximately 2 minutes until the boot process is completed.  
After a successful boot process the USR LED is blinking green slowly.  
If the USR LED is blinking red according to a given pattern, it indicates that the boot process was  
interrupted due to a problem. The most frequent problem is :  
a duplicate IP address was detected on the LAN network: USR LED blinking pattern is red 1x  
short, 1x long  
For other error LED patterns, please refer to the General Reference Guide for Cosy+ from the  
5.3  
5.4  
Connecting to the LAN IP Address  
Establish the first communication with the Ewon Cosy+ by using Ewon Cosy+ companion tool  
eBuddy which can be downloaded from www.ewon.biz/support.  
Connect a LAN port (port #1 is always set as a LAN port) of the Ewon Cosy+ to one’s computer  
either through a point-to-point connection or a network where there is no risk Cosy+'s default IP  
address (10.0.0.53) would conflict with another connected device.  
Ewon Cosy+ Web Interface  
While the computer is connected to a LAN port of the Ewon Cosy+, open an Internet browser  
and reach the Ewon Cosy+ web server whose URL is the LAN IP address of the Cosy+.  
Another way to access the web panel of the Cosy+ is by using eBuddy. To get started with  
eBuddy and access the Cosy+, refer to the eBuddy of the Related Documents, p. 3.  
At the very first boot of the Cosy+ or after a level 2 reset, an interface language selection will be  
proposed.  
Before beginning the configuration of the Cosy+, an authentication is required.  
Default login & password are both adm. For security reasons, the Ewon Cosy+ will ask you  
to change the adm password.  
You can perform the configuration of your Ewon Cosy+ through different methods:  
IG-0031-00 1.1 en-US  
Ewon Cosy+ Installation Guide  
         
GeneralDetails
NameEWON EC71330 Cosy 131 Ethernet router Installation Guide
MakeEWON
LanguageEnglish
FiletypePDF (Download)
File size0.42 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

If you have any questions regarding EWON EC71330 Cosy 131 Ethernet router Installation Guide, please ask here and describe the problem in detail.

Leave a Reply

Your email address will not be published. Required fields are marked *

14 + one =

EWON EC71330 Cosy 131 Ethernet router Installation Guide