×
- 1. Mofi5500-5gxelte4g/lte/5g* (Advanced High Performance Router → Updated Manual Can Be Located At: Www.mofinetwork.com)
- 2. About The Product (Requirements → Getting Started → Installing Your Router → Connecting To The Internet Via 4g/lte/5g* → How To Do A Firmware Upgrade → Troubleshooting)
- 3. About The Product (Advanced Wireless Security → Wide Wireless Coverage → Easy To Install And Use)
- 4. Installation (Setup → Configuration → Security Features → Network Connection → Antenna Setup → Auto Fail Over)
- 5. Requirements
- 6. Device Design - Front Panel (Internet Using The Sim Card → Normal Use → Wi-fi → Wan → No Ethernet Connection → Ethernet 1-4)
- 7. Front View (Connecting With Computers/devices Using An Ethernet Cable → Connect To A Modem Cable/dsl/satellite Using An Ethernet Cable → Press For 10 Seconds To Reset To The Factory Default. → Use 12v 3.5a Power Adapter → Note To Get 5g Cellular, You Will Need The Mofi5500-5gxelte-em9191 Model)
- 8. Getting Started (Plan Your Network → Remove/disable Conflicts → Connect The Modem, Computer, And Power Adaptor To The Router. → Setup The Router → Connect To The Internet → Ready To Use)
- 9. Plan Your Network (Using A 4g/lte/5g* Usb Modem Stick → Using A Dsl/cable Modem)
- 10. Remove Or Disable Conflicts (Internet Sharing, Proxy, And Security Applications → Configuring The Tcp/ip Settings)
- 11. Configuringinternetproperties (Removingtemporaryinternetfiles)
- 12. Installing Your Router (Using A Sim Card From Your Provider Direct From Provider → Using A Dsl Or Cable Modem Or Satellite Modem → Connect Your Pc To Any Available Ethernet Port Using An Ethernet Cable Or Connect Via Wireless → Check Your Settings → Confirm The Apn Is Correct → Ensure That The Routers Ip Address Does Not Conflict With The Dsl/cable/satellite Modem)
- 13. Connecting To The Internet Via 4g/lte/5g* (To Connect To The Internet Via The Web User Interface → Run The Wizard On The Top Right → If You Have A Micro Or Nano Sim → Turn The Router On The Bottom)
- 14. Wireless Network Name Setup (Change Network Name (essid) → Add Wireless Password → Dual Band Wifi Configuration → Wpa2-psk Encryption → Save Changes)
- 15. How To Forward Ports (Port Forwarding → Select The Protocol → Enter The External Port → Select The Ip Address Of The Device → Public Ip Service → Mofi Cloud Link)
- 16. How To Open Ports In The Router (Log Into The Router → Click On Advanced Mode --> Network Tab --> Firewall → To Actually Use This, You May Have To Set A Port Forward Rule → Click On Network Tab --> Port Forwarding)
- 17. How To Set A Wireless Bridge/repeater (Connect The Router To Your Pc With The Ethernet Cable → Log Into The Router → Go To Wifi Bridge/repeater Under Network → Under 2.4ghz Scan / 5.0ghz → Click On 'select Me' For The Network → Under Wifi 2.4ghz / 5ghz, Make Sure It Is Enabled)
- 18. Under Bridge/repeater 2.4ghz / 5ghz (this) Router (Wifi Name Configuration → Password Setup → Save Changes → Router Connection Status → Power Cycle The Router → Troubleshooting Internet Connection)
- 19. How To Do A Firmware Upgrade (Remote Update → Manual Firmware Update → Factory Default Reset → Mofi Recovery → G Cellular Requirement)
- 20. How To Remote Login Into The Router (Remote Login On The Mofi5500 Router → Port 8080 Is The Official Port For Remote Access → Access Your Router Remotely → Using A Cellular Connection → Contact Your Internet Service Provider → Contact Us For A Public Ip Option)
- 21. How To Modify Settings/ports For Remote Access (To Change The Port → If You Want To Disable Access For Remote Access → If You Want To Limit Remote Access To Specific Ip Address → For The Interface → Under White List → *note To Get 5g Cellular)
- 22. Fail Over (To Activate Fail Over, Go To Mofi Business → Enable By Checking Box → Save & Reboot Router)
- 23. Load Balancing (To Active Load Balancing, Go To Mofi Business → Fail Over/load Balancing → Enable By Checking The Box That Says Enable Load Balancing → Save And Reboot The Router)
- 24. Ip Pass Through (To Enable Ip Pass-through → When Ip Pass Through Is On → If You Need Access Back To The Router → Note That By Default → If You Require A Public Ip Address → If You Make A Mistake And Cant Back In The Router)
- 25. Mofi Recovery (How To Recover Router From Wrong File Update Or Other Problem → Recovery Steps → Boot Recovery Steps → Set Router In Recovery Mode → Set Your Network Connection To Static Ip Address → Note For 5g Cellular)
- 26. Mofi Recovery Interface (Set Back Your Network Cable To Automatic → Log Into The Router)
- 27. How To Enable Remote Management (Basic Mode --> System --> Remote Management → Note: Please Make A Note Of The Returned Password → Server Is Located At: Https://manage.mofimanage.com → Please Contact Support@mofinetwork.com To Reset Your Password)
- 28. Reboot/unplug The Router After Everything Has Been Setup (Log In Using The Username (mac Address Of Your Router) And The Password → Edit: Change Your Password On The Server → Router/wifi Password: Change Both Your Router Admin Password And/or Your Wifi Password → Wifissid: Change The Network Name On Your Router)
- 29. Wifi Status (Show Remote Gui → Bandwidth → Firmware Operation → Factory Default → Reboot)
- 30. Mofi Cloud Link (Static Dedicated Public Ip Service → Do You Need A Public Ip Address Or Do You Know What It Is? → Understanding Private Vs Public Ip Addresses → Checking Your Ip Address → Benefits Of Mofi Cloud → Consistency Of Ip Address Across Providers)
- 31. Instructions On How To Set This Up (Log Into The Router → Go To Business Then Mofi Cloud → Check The Box To Enable Cloudlink → Select The Location That Your Account Is On → Click Browse And Then Select The .conf File → Preparing Your Device For Port Forwarding)
- 32. Going Back To The Mofi Cloud Section, There Is An Option To Add Your Device That You Want To Use With The Public Ip Address. You Can Add As …
- 33. You Will Have To Use Cloudlink/vpn Instead Of Wan For The External Source
- 34. Manually Setting Lte Band (To Do A Selective Band Lock, Follow The Steps Below: → First Log Into The Router By Visiting 192.168.10.1 On Your Browser → From The List On The Left Click On Network And Then Go To Selective Band Lock → At This Point From The Drop Down Menu Of The Lte Bands, Select Custom → The Next Thing You Should Do Is Click On The Button That Says Clear All Lte Bands)
- 35. Selective Band Lock (Speed Band Lock → Logging Into The Router → Internet Service Provider Selection → Band Selection For Locking → Saving Changes → Effect Of Changes On Connection Speed)
- 36. Start Scan (Exceptions → Note → Selective Band Lock)
- 37. Bandwidth Monitoring (Log Into The Router → Bandwidth And Filters → Internet Usage Set Date → Select The Date Of Reset → Save And Then Reboot The Router → Make Sure Your Computer Is Connected To The Mofi5500 Router)
- 38. Bandwidth Monitor (User Limits → Enable User Limits → Add Device → Set Limit → Save And Reboot Router → Unblock Option)
- 39. Troubleshooting (Log Into Router → Mofi5500-5gxelte-em9191 Model)
- 40. Factory Default (Resetting The Router → Manual Reset Procedure → Power Led Indicators → Internet Connection Verification)
- 41. Go To Mofi Internal Modem Then Click On The Configuration Tab (What Does It Say For The Carrier Id? → What Does It Say For The Phone Number? → You Should Contact Your Provider And Verify What Apn (access Point Name) That You Need Use. → Once You Know What Apn You Need To Use, Log Into The Router And Go To Mofiinternal Modem → Then Click On Country And Select Custom Apn → After It Is Saved, Reboot The Router)
- 42. Block By Mac (mac Filtering) (In Order To Enable Mac Filtering You Will Need To Log Into The Router And Follow The Steps Below: → Check The Box That Says Enable Mac Filtering → Also Check The Enable Box Under Schedule Time Slots → You Can Also Set Rules For Certain Days Of A Week And Then Name That Time Slot)
- 43. White List Mac Address (Save And Reboot The Router → Note To Get 5g Cellular)
- 44. Regulatory Compliance Notices (Fcc Notice → Modifications → Exposure Information To Radio Frequency Energy)
- 45. Installation Requirements (Compliance With Fcc Radiation Exposure Limits → European Regulations → Model Requirements For 5g Cellular)
×
MOFI5500 AdvancedHigh Performance Router User Manual
User Manual v1.0
Plan Your Network
1. Using a 4G/LTE/5G* USB Modem Stick
2. Using a DSL/Cable modem (If your DSL/Cable modem is both a router and a modem, contact us.
*Note to get 5G cellular, you will need the MOFI5500-5GXeLTE-EM9191 model
| General | Details |
|---|---|
| Name | MOFI5500 AdvancedHigh Performance Router User Manual |
| Make | MoFi |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.85 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding MOFI5500 AdvancedHigh Performance Router User Manual, please ask here and describe the problem in detail.
ASUS ExpertWiFi EBR63 Wireless AX3000 Dual-Band Router User Guide
JENSEN Air:Link 3000DG Dual Band Router User Manual
ASUS GT-BE98 Quad Band Gaming Router User Guide
Calix BLAST u6 Gigaspire Mesh WiFi 6 Router User Guide
ioGiant AX1800 Wi-Fi Router Smart Wireless Router Installation Guide
Juniper NETWORKS PTX10001-36MR Packet Transport Router User Guide
Ibex-RT-630-5G Series EN 50155 5G and WLAN Router User Manual
TP-Link BE3600 Wi-Fi 7 Portable Router User Guide
ARISTA 7220R Series Enterprise WAN Router Instruction Manual
ASUS ROG Rapture GT6 Router User Guide
Table of Contents
- 1. Mofi5500-5gxelte4g/lte/5g* - Advanced High Performance Route... →
- 2. About The Product - Requirements →
- 3. About The Product - Advanced Wireless Security →
- 4. Installation - Setup →
- 5. Requirements →
- 6. Device Design - Front Panel - Internet Using The Sim Card →
- 7. Front View - Connecting With Computers/devices Using An Ethe... →
- 8. Getting Started - Plan Your Network →
- 9. Plan Your Network - Using A 4g/lte/5g* Usb Modem Stick →
- 10. Remove Or Disable Conflicts - Internet Sharing, Proxy, And S... →
- 11. Configuringinternetproperties - Removingtemporaryinternetfil... →
- 12. Installing Your Router - Using A Sim Card From Your Provider... →
- 13. Connecting To The Internet Via 4g/lte/5g* - To Connect To Th... →
- 14. Wireless Network Name Setup - Change Network Name (essid) →
- 15. How To Forward Ports - Port Forwarding →
- 16. How To Open Ports In The Router - Log Into The Router →
- 17. How To Set A Wireless Bridge/repeater - Connect The Router T... →
- 18. Under Bridge/repeater 2.4ghz / 5ghz (this) Router - Wifi Nam... →
- 19. How To Do A Firmware Upgrade - Remote Update →
- 20. How To Remote Login Into The Router - Remote Login On The Mo... →
- 21. How To Modify Settings/ports For Remote Access - To Change T... →
- 22. Fail Over - To Activate Fail Over, Go To Mofi Business →
- 23. Load Balancing - To Active Load Balancing, Go To Mofi Busine... →
- 24. Ip Pass Through - To Enable Ip Pass-through →
- 25. Mofi Recovery - How To Recover Router From Wrong File Update... →
- 26. Mofi Recovery Interface - Set Back Your Network Cable To Aut... →
- 27. How To Enable Remote Management - Basic Mode --> System --> ... →
- 28. Reboot/unplug The Router After Everything Has Been Setup - L... →
- 29. Wifi Status - Show Remote Gui →
- 30. Mofi Cloud Link - Static Dedicated Public Ip Service →
- 31. Instructions On How To Set This Up - Log Into The Router →
- 32. Going Back To The Mofi Cloud Section, There Is An Option To ... →
- 33. You Will Have To Use Cloudlink/vpn Instead Of Wan For The Ex... →
- 34. Manually Setting Lte Band - To Do A Selective Band Lock, Fol... →
- 35. Selective Band Lock - Speed Band Lock →
- 36. Start Scan - Exceptions →
- 37. Bandwidth Monitoring - Log Into The Router →
- 38. Bandwidth Monitor - User Limits →
- 39. Troubleshooting - Log Into Router →
- 40. Factory Default - Resetting The Router →
- 41. Go To Mofi Internal Modem Then Click On The Configuration Ta... →
- 42. Block By Mac (mac Filtering) - In Order To Enable Mac Filter... →
- 43. White List Mac Address - Save And Reboot The Router →
- 44. Regulatory Compliance Notices - Fcc Notice →
- 45. Installation Requirements - Compliance With Fcc Radiation Ex... →