Home > MoFi > MOFI5500 AdvancedHigh Performance Router User Manual

MOFI5500 AdvancedHigh Performance Router User Manual

User Manual v1.0  
Installing your Router  
The MOFI5500-5GXELTE SIM Versioncan be used in many ways including as a 4G/LTE/5G* router or just a regular  
Cable/DSL/Satellitehigh speed router including using it with Starlink.  
Using a SIM card from your provider direct from provider  
1. Insert your SIM card in the SIM card slot on the side of the router and connect all antennas to router.  
(Note that when looking down on the router, the sim card should be facing up and the cut on the sim card should go in the  
router first and you should feel a click when the sim card is in correct. Note also that only a large sim card (2FF) can be  
used so if you have a micro or a nano sim, you need to use the sim card adaptor to make it to the largest size.)  
2. Connect the power cable to the router’s power jack and plug it in to the wall socket.  
3. Connect your PC to any available Ethernet port using an Ethernet cable or connect via wireless.  
(do not use the WAN)  
4. At this point, your connection should be connected. If not, you will need to check your settings  
- Is the APN correct and is the router reading the sim card fine? To check this, log into the router  
Go to Mofi Internal Modem then click on the configuration tab on the left  
The carrier ID should show up (that is how you know the router is reading the sim card)  
On the bottom of that page, it will show the current access point (APN) that you are using.  
You need to confirm the APN is correct that you need to use, if not, then you can select it from the APN list what you need to  
use or under country, select custom apn and enter the apn that you want to use then save and reboot.  
Using a DSL or Cable Modem or Satellite Modem  
If you choose to use a DSL, Cable or Satellite modem you are required to have the following:  
.
.
DSL or cable modem or Satellite modem  
Active Internet Account  
1. Connect your DSL, Cable or Satellite modem to the router’s WAN port using an Ethernet cable.  
2. Connect the power cable to the router’s power jack and plug it in to the wall socket.  
3. Connect your PC to any of available Ethernet port using an Ethernet cable or connect via wireless.  
Note: Ensure that the router’s IP address does not conflict with the DSL/Cable/Satellite modem. Please refer to your  
modem’s User Manual on how to change the LAN IP address. The default IP on the MOFI5500-5GXeLTE is 192.168.10.1  
Page 12of 45  
GeneralDetails
NameMOFI5500 AdvancedHigh Performance Router User Manual
MakeMoFi
LanguageEnglish
FiletypePDF (Download)
File size0.85 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

If you have any questions regarding MOFI5500 AdvancedHigh Performance Router User Manual, please ask here and describe the problem in detail.

Leave a Reply

Your email address will not be published. Required fields are marked *

four × 5 =

MOFI5500 AdvancedHigh Performance Router User Manual