Home > NET MODULE > NET MODULE NB1601 Router User Manual

NET MODULE NB1601 Router User Manual

NB1601  
User Manual for NRSW version 4.4  
needle or paper clip which must be inserted into the hole  
pressed for up to 5 seconds until all LEDs flash up.  
. The button must be hold  
2. Serial Console Login: It is also possible to log into the system via the serial port. This would re-  
quire a terminal emulator (such as PuTTY or HyperTerminal) and an RS232 connection (115200  
8N1) attached to the serial port of your local computer. You will also see the kernel messages at  
bootup there.  
3. Recovery Image: In severe cases we can provide a recovery image on demand which can be  
loaded into RAM via TFTP and executed. It offers a minimal system image for running a software  
update or doing other modifications. You will be provided with two files, recovery-image and  
recovery-dtb, which must be placed in the root directory of a TFTP server (connected via LAN1  
and address 192.168.1.254). The recovery image can be launched from the boot-loader using a  
serial connection. You will have to stop the boot process by pressing s and enter the bootloader.  
You can then issue run recovery to load the image and start the system which can be accessed  
via HTTP/SSH/Telnet and its IP address 192.168.1.1 afterwards. This procedure can be also  
initiated by holding the factory reset button longer than 15 seconds.  
37  
GeneralDetails
NameNET MODULE NB1601 Router User Manual
MakeNET MODULE
LanguageEnglish
FiletypePDF (Download)
File size3.35 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

Leave a Reply

Your email address will not be published. Required fields are marked *

sixteen − 2 =

NET MODULE NB1601 Router User Manual