Home > NET MODULE > NET MODULE NB1601 Router User Manual

NET MODULE NB1601 Router User Manual

NB1601  
User Manual for NRSW version 4.4  
Antenna Port  
MOB 2 A7  
Type  
Auxiliary  
Table 4.1.: LTE/UMTS antenna port types  
Attention: Following points must be observed when installing the antennas:  
– A minimum clearance of at least 40 cm between people and the antennas must always  
be ensured.  
– If one mobile inerface transmit simultaneously with other collocated radio transmitters  
the separation distance of 20 cm between the antennas must be maintained at all  
times.  
– Antennas which are installed outside a building or the vehicle hull must limit transient  
overvoltages (according to IEC 62368-1) to below a peak of 1500 V through external  
protection circuits.  
– Mobile communications antennas may have an amplification of maximum 2.5dBi, in-  
cluding the cable attenuation, in the relevant frequency range.  
4.3. Installation of the WLAN Antennas  
The following table shows how to connect the WLAN antennas. The number of attached antennas  
can be configured in the software. If only one antenna is used, it must be attached to the main port.  
However, for better diversity and thus better throughput and coverage, we highly recommend using  
two antennas.  
Antenna Port  
WLAN 1 A3  
WLAN 1 A4  
WLAN 2 A6  
WLAN 2 A7  
Type  
Main  
Auxiliary  
Main  
Auxiliary  
Table 4.2.: WLAN antenna port types  
32  
GeneralDetails
NameNET MODULE NB1601 Router User Manual
MakeNET MODULE
LanguageEnglish
FiletypePDF (Download)
File size3.35 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

If you have any questions regarding NET MODULE NB1601 Router User Manual, please ask here and describe the problem in detail.

Leave a Reply

Your email address will not be published. Required fields are marked *

five × five =

NET MODULE NB1601 Router User Manual