Home > SIERRA WIRELESS > SIERRA WIRELESS AirLink LX40 Enterprise LTE Router User Guide
SIERRA WIRELESS AirLink LX40 Enterprise LTE Router User Guide
Installation and Startup
High Side Pull-up / Dry Contact Switch Input
You can use the green wire to connect Pin 4 to a dry contact switch. The dry contact
switch is not available in Standby mode.
LX40
Vin*
Internal pull-up
resistor (10K)
Pin 4 (power connector)
On**
ISource = 1.1 mA (Typ)
Protection
Circuitry
Output Off (default)**
*Depending on the load, this value can range from Vin to Vin - 2.5 V.
** Configurable on the ACEmanager I/O tab
Figure 2-14: High Side Pull-up / Dry Contact Switch Input
Table 2-5: High Side Pull-up / Dry Contact Switch Input
Minimum Typical Maximum
Comments
Source Current
0.6 mA
1.1 mA
= 12 V
3.5 mA
Maximum current the voltage output can
provide (depends on V )
in
V
= 7 V
V
V
= 36 V
in
in
in
V
V
- 2.5 V
—
V
The voltage on Pin 4 when the high side
out
in
in
pull-up is enabled (depends on V and
in
power consumption)
Analog Input
You can connect Pin 4 on the power connector to an analog sensor. As an analog input
(voltage sensing pin), the router monitors voltage changes in small increments. This
allows you to monitor equipment that reports status as an analog voltage.
The pin detects inputs of 0.5–5 V or 0.5–10 V referenced to ground. When used with a
sensor to transform values into voltages, the pin can monitor measurements such as
temperatures, sensors, or input voltage.
Using ACEmanager, you can select the range of voltage to be monitored to be
0–5 V or 0–10 V. For low input voltages, 0–5 V provides better accuracy.
Rev. 4 January 2022
27
41112510
| General | Details |
|---|---|
| Name | SIERRA WIRELESS AirLink LX40 Enterprise LTE Router User Guide |
| Make | SIERRA WIRELESS |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.96 MB |
If you have any questions regarding SIERRA WIRELESS AirLink LX40 Enterprise LTE Router User Guide, please ask here and describe the problem in detail.

SIERRA WIRELESS XR80 5G Cellular Router Instructions











































































