TP-Link Archer AX3200 Tri Band Wifi 6 Router Installation Guide

1

2

2

LED Explanation  

Need Help?  

Set Up the Network  

Q1. What should I do if I want to use 1 Gbps WAN/LAN port for internet service?  

• Connect to the 1 Gbps WAN/LAN port with an Ethernet cable. During the quick network  

setup, select the 1 Gbps WAN/LAN port as the Internet port. Or after the network setup, you  

can go to Tools > Internet Connection > Internet Port (Tether app) or Internet > Internet  

Port (web management page) to change it.  

Method ONE: Via TP-Link Tether App  

Method TWO: Via a Web Browser  

LED  

Description  

Solid Orange  

Pulsing Orange  

Solid Red  

The Wi-Fi is off.  

1. Download the Tether app.  

1. Connect your device to the router wirelessly  

or with an Ethernet cable.  

The system is starting up.  

No internet connection.  

The default wireless network names (SSIDs) and password  

are printed on the label at the bottom of the router.  

or  

Q2. What should I do if I can’t access the web management page?  

• Reboot your router and try again.  

Model: Archer AX3000  

• If the computer is set to a static IP, change its settings to obtain an IP address automatically.  

• Verify that http://tplinkwifi.net is correctly entered in the web browser. Alternatively, enter  

http://192.168.0.1 or http://192.168.1.1 in the web browser.  

• Use another web browser and try again.  

Scan for Tether  

Tether  

AX3000 Gigabit Wi-Fi Router  

Pulsing Red  

Solid Blue  

The Wi-Fi is off and there is no internet connection.  

The router is working properly.  

2. Open the Tether app and log in with your  

TP-Link ID.  

The firmware is being upgraded, WPS connection is being  

established or the router is being reset.  

Wireless Password/PIN:XXXXXXXX  

SSID:TP-Link_XXXX  

SSID:TP-Link_XXXX_5G_1  

SSID:TP-Link_XXXX_5G_2  

Pulsing Blue  

• Disable and enable the network adapter in use.  

Note: If you don’t have an account, create one first.  

Q3. What should I do if I can’t access the internet?  

• Log in to the web management page of the router, go to Internet > Internet Port, and check  

if you selected the port that you've already plugged your Ethernet cable into.  

• Reboot your modem and router, then try again.  

• Check if the internet is working normally by connecting a computer directly to the modem  

via an Ethernet cable. If it is not, contact your internet service provider.  

• Log in to the web management page of the router, and go to the Network Map page to  

check whether the internet IP address is valid or not. If it is, go to Advanced > Quick Setup  

to set up again; otherwise, check the hardware connection.  

3. Tap the button in the Tether app and  

select Router > Wireless Router. Follow  

the steps to complete the setup and  

connect to the internet.  

Button Explanation  

2. Launch a web browser, and enter  

http://tplinkwifi.net or http://192.168.0.1 in  

the address bar. Create a password to log in.  

Button  

Description  

Note: If the login window does not appear, please refer to  

Q2 of Need Help? in this guide.  

Press the WPS button, and immediately press the WPS  

button on your client to start the WPS process.  

WPS  

http://tplinkwifi.net  

Press and hold the Wi-Fi button for about 2 seconds to turn  

on or off the wireless function of your router.  

• For cable modem users, log in to the web management page of the router and go to  

Advanced > Network > Internet > MAC Clone. Select Clone Current Device MAC and click  

Save. Then reboot both the modem and the router.  

Wi-Fi  

LED  

New Password:  

Choose your device type  

Press the LED button to turn on or off the LED of your router.  

Confirm Password:  

Router  

Q4. What should I do if I forget my wireless password?  

•

If you have not changed the default wireless password, it can be found on the label at the  

bottom of the router.  

Connect a computer directly to the router using an Ethernet cable. Log in to the router’s web  

management page at http://tplinkwifi.net, and go to the Wireless page to retrieve or reset your  

Range Extender  

Let’s Get Started  

For technical support, replacement services, user guides and  

Archer AX11000  

Archer C5400X  

more, please visit https://www.tp-link.com/support  

•

To communicate with TP-Link users or engineers, visit  

https://community.tp-link.com to join TP-Link Community.  

3. Follow the step-by-step instructions to  

set up the internet connection and  

register for the TP-Link Cloud service.  

Archer AX6000  

wireless password  

.

Email techwriter@tp-link.com.cn to give suggestions.  

Q5. What should I do if I forget my web management page password?  

• If you are using a TP-Link ID to log in, click Forgot Password? on the login page and then  

follow the instructions to reset it.  

· Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.  

· Keep the device away from water, fire, humidity or hot environments.  

· Do not use any other chargers than those recommended.  

· Do not use damaged charger or USB cable to charge the device.  

• Alternatively, press and hold the Reset button until the LED blinks. Then visit  

· Do not use the device where wireless devices are not allowed.  

· Adapter shall be installed near the equipment and shall be easily accessible.  

http://tplinkwifi.net to create a new login password.  

©2020 TP-Link 7106508900 REV1.0.0  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	TP-Link Archer AX3200 Tri Band Wifi 6 Router Installation Guide
Make	TP-Link
Language	English
Filetype	PDF (Download)
File size	0.58 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• TP-Link

Questions and Answers (0)

If you have any questions regarding TP-Link Archer AX3200 Tri Band Wifi 6 Router Installation Guide, please ask here and describe the problem in detail.