TP-Link AX1450 Dual Band Wi-Fi 6 Router Installation Guide

1

2

Button Explanation  

Need Help?  

WPS/Wi-Fi Button  

Q1. What should I do if I can’t access the web  

Press the button for 1 second, and immediately press the  

WPS button on your client to start the WPS process.  

Press and hold the button for more than 2 seconds, then  

release the button to turn on or off the wireless function of  

your router.  

management page?  

ꢀ

ꢀ

Reboot your router and try again.  

If the computer is set to a static IP, change its settings to  

obtain an IP address automatically.  

Quick Installation Guide  

ꢀ

Verify that http://tplinkwifi.net is correctly entered in the web  

browser. Alternatively, enter http://192.168.0.1 or  

http://192.168.1.1 in the web browser.  

Reset Button  

Press and hold the button for about 6 seconds until the Power  

LED blinks to reset the router to its factory default settings.  

ꢀ

ꢀ

Use another web browser and try again.  

Disable and enable the network adapter in use.  

Q2. What should I do if I can’t access the internet?  

EasyMesh-Compatible  

You can experience strong, stable, and seamless  

wireless connections throughout your home with  

EasyMesh.  

ꢀ

ꢀ

ꢀ

Power off your modem for about 5 minutes, then power it on  

and check the internet. If your modem has more than one  

Ethernet port, keep other ports unconnected.  

Check if the internet is working normally by connecting a  

computer directly to the modem via an Ethernet cable. If it is  

not, contact your internet service provider.  

Setup Video  

Seamless Roaming  

Connects mobile devices to your routers or extenders  

that provide the best coverage. Devices compatible with  

EasyMesh also share a single Wi-Fi name so you stay  

connected in every room.  

Log in to the web management page, and go to the Network  

Map page to check whether the internet IP address is valid  

or not. If it’s valid, go to Advanced > Network > Internet,  

click Advanced Settings, select Use the Following DNS  

Addresses, set the primary DNS to 8.8.8.8, and set the  

secondary DNS to 8.8.4.4. If it is not, check the hardware  

connection or contact your internet service provider.  

For cable modem users, log in to the web management  

page of the router and go to Advanced > Network > Internet  

> MAC Clone. Select Clone Current Device MAC and click  

SAVE. Then reboot both the modem and the router.  

One-Click Settings  

Press the WPS button on the main router and the satellite  

device within 2 minutes of each other, then the EasyMesh  

network will set up.  

ꢀ

Flexible Scalability  

Flexibly scale your home networking with different  

vendors,* different topologies, different Protocols and  

different product categories.  

Q3. What should I do if I forget my wireless password?  

ꢀ

If you have not changed the default wireless password, it can  

be found on the label at the bottom of the router.  

Connect a computer directly to the router using an Ethernet  

cable. Log in to the router’s web management page at  

http://tplinkwifi.net, and go to the Wireless page to retrieve  

or reset your wireless password.  

*Failure may be due to firmware conflicts of different vendors. A  

better network connection can be established between all APs  

from TP-Link.  

ꢀ

For more information, visit https://www.tp-link.com/easymesh/  

TP-Link hereby declares that the device is in compliance with the essential  

requirements and other relevant provisions of directives 2014/53/EU,  

2009/125/EC, 2011 /65/EU and (EU) 2015/863.  

The original EU declaration of conformity may be found at  

https://www.tp-link.com/en/support/ce  

Q4. What should I do if I forget my web management  

page password?  

TP-Link hereby declares that the device is in compliance with the essential  

requirements and other relevant provisions of the Radio Equipment  

Regulations 2017.  

ꢀ

If you are using a TP-Link ID to log in, click Forgot  

Password? on the login page and then follow the  

instructions to reset it.  

Dual Band Wi-Fi 6 Router  

The original UK declaration of conformity may be found at  

https://www.tp-link.com/support/ukca  

· Keep the device away from water, fire, humidity or hot environments.  

· Do not attempt to disassemble, repair, or modify the device. If you need  

service, please contact us.  

· Do not use any other chargers than those recommended.  

· Do not use damaged charger or USB cable to charge the device.  

· Do not use the device where wireless devices are not allowed.  

· Adapter shall be installed near the equipment and shall be easily accessible.  

ꢀ

Alternatively, press and hold the Reset button on the back  

for about 6 seconds until the Power LED blinks. Then visit  

http://tplinkwifi.net to create a new login password.  

For technical support, replacement services, user guides  

and more, please visit https://www.tp-link.com/support  

©2024 TP-Link 7106511442 REV3.1.0  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	TP-Link AX1450 Dual Band Wi-Fi 6 Router Installation Guide
Make	TP-Link
Language	English
Filetype	PDF (Download)
File size	0.55 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• TP-Link

Questions and Answers (0)

If you have any questions regarding TP-Link AX1450 Dual Band Wi-Fi 6 Router Installation Guide, please ask here and describe the problem in detail.