VIMAR 01416 Automation IP Video Entry System Router User Manual

1

2

3

4

5

6

7

8

SMART AUTOMATION  

01416  

• RJ45 2 socket outlet for connection to IP video entryphone network (ETH2)  

• Port for micro SD card  

• In the event of access to mini/micro USB, micro SD ports and reset button (SELV interfaces),  

comply with the measures required to prevent electrostatic discharge from the user, which  

could damage the device.  

The router 01416 enables the transfer of information between the IP video entryphone net-  

work and an IP user network; if the latter has an Internet connection, via the cloud, all remote  

management functions for both installer and end user can be enabled. For an overview of  

the integrated architecture, see the figure EXAMPLE OF INTEGRATED INFRASTRUCTURE.  

WARNING: Update the firmware to the latest version! You can download it via cloud (with  

the device connected to the Internet) or from www.vimar.com  Download  Software  

 VIEW Pro.  

The VIEW Pro APP manual can be downloaded from the www.vimar.com website using  

the router 01416 article code.  

OPERATION.  

The router 01416 diversifies its functions according to the type of user (installer, end user or  

touch screen supervisor) interacting with the device via the LAN/IP network associated to the  

ETH1 interface on the router 01416.  

REGULATORY COMPLIANCE.  

EMC directive. Standards EN 60950-1, EN 61000-6-1, EN61000-6-3.  

Installer  

REACH (EU) Regulation no. 1907/2006 – Art.33. The product may contain traces of lead.  

Configures the router 01416, setting the Date/Time, End User, associates the supervisor devices  

(touch screen art.s 01420, 01422 and 01425), etc.  

WEEE - Information for users  

If the crossed-out bin symbol appears on the equipment or packaging, this means the product must not  

be included with other general waste at the end of its working life. The user must take the worn product to  

a sorted waste center, or return it to the retailer when purchasing a new one. Products for disposal can be  

consigned free of charge (without any new purchase obligation) to retailers with a sales area of at least 400 m²,  

if they measure less than 25 cm. An efficient sorted waste collection for the environmentally friendly disposal  

of the used device, or its subsequent recycling, helps avoid the potential negative effects on the environment  

and people’s health, and encourages the re-use and/or recycling of the construction materials.  

End User  

Uses the IP video door entry system services (video calls generated by outdoor units, notifica-  

tions, messages and alarms) via local touch screens or via an APP, also remotely, via the cloud.  

Functions available from the touch screen  

- Outdoor unit self-starting.  

Router IoT pour l’intégration du système portier-vidéo IP au réseau IP/LAN,  

cloud et App pour smartphone, tablette ou écran tactile de supervision, instal-  

lation sur rail DIN (60715 TH35), occupe 4 modules de 17,5 mm.  

- Outdoor unit lock opening.  

- Audio intercom calls.  

- Activating system actuations (stair light, auxiliary functions).  

- System contacts list and favourites menu for quick access.  

- Configurable video voicemail.  

- Input for landing bell.  

- Support for CCTV integration.  

- Configuration of the router 01416 in the video entryphone system via the Video Door IP  

Manager software.  

Le router 01416 permet de connecter le système portier-vidéo IP au réseau Ethernet LAN de  

l’utilisateur pour gérer le système portier-vidéo IP avec les systèmes domotiques Vimar. La con-  

nectivité IP/LAN utilisateur permet d’exécuter toutes ces opérations localement ou à distance  

avec les App disponibles pour Android/iOS.  

CARACTÉRISTIQUES.  

• Alimentation: 12-30 Vcc SELV  

• Consommation:  

- 300 mA max à 12 Vcc  

- 140 mA max à 30 Vcc  

• Puissance maxi dissipée : 4 W  

• Connexion aux réseaux LAN par la prise RJ45 (10/100 Mbps)  

• 4 boutons de commande rétroéclairés  

• Entrée pour appel palier  

Key functions  

• F1= Key for emergency procedure: the network configuration in DHCP is indicated, and the  

connection to the Cloud re-enabled (press for 10 s).  

• F2= Key to request new IP address from the DHCP server (short press, only if set in DHCP on  

the user/ETH1 home automation system domain network).  

• F3= No function.  

• CONF= Key for Installer user association.  

• Température de service: - 5 + 40° C (à l’intérieur)  

• Humidité ambiante de service 10 - 80 % (sans condensation)  

• Indice de protection IP30  

LED indications  

When the gateway is switched on only LED F1 comes on for the full duration of the start-up  

procedure, and then - together with the other LEDs - signals the current operating status.  

F1:  

BRANCHEMENTS.  

• Bornes:  

• On = Device working correctly.  

- alimentation 12- 30 Vcc SELV  

• Flashing = Device reset in progress.  

• Prise RJ45 1 pour connexion au réseau Ethernet (ETH1) du domaine utilisateur/domotique  

• Prise RJ45 2 pour connexion au réseau visiophonique IP (ETH2)  

• Port pour carte micro SD  

• Off = Device not working or Cloud enabled but not reachable.  

F2 (router state in relation to the user IP/LAN network connected to the ETH1 socket outlet):  

• On = Connection active and running.  

Le router 01416 commande le transfert des informations entre le réseau visiophonique IP et  

le réseau IP de l’utilisateur ; avec une connexion Internet, les fonctions de gestion à distance  

peuvent être activées par le cloud pour l’installateur et pour l'utilisateur. Pour un aperçu de  

l’architecture intégrée, voir la figure EXEMPLE D’INFRASTRUCTURE INTÉGRÉE.  

• Off = No Ethernet connection (cable disconnected).  

• Flashing = Connection active and running but with no IP address assigned (check the DHCP  

server).  

F3 (router state in relation to the IP video entryphone connected to the ETH2 socket outlet):  

• On = Connection active and running.  

FONCTIONNEMENT.  

Le router 01416 diversifie ses fonctions selon le type d’utilisation (installateur, utilisateur ou écran  

tactile de supervision) en interaction avec elle par le réseau LAN/IP associé à son interface ETH1.  

• Off = No bus connection (cable disconnected).  

• Flashing = Connection active and running but with no video entryphone functions configured.  

Installateur  

CONF: The LED comes on when the user/device is pairing.  

Il configure le router 01416, sélectionne la date et l’heure, l’utilisateur, associe les dispositifs de  

supervision (écran tactile art. 01420, 01422 et 01425), etc.  

INSTALLATION RULES.  

• Installation must be carried out by qualified persons in compliance with the current regulations  

regarding the installation of electrical equipment in the country where the products are installed.  

• The router 01416 must be installed inside the electrical panels and must therefore be housed  

in the containers with DIN rail support.  

• The router 01416 can be powered by:  

- Power supply 01831.1 (output 12V).  

- Power supply 01400 or 01401 (via output 29V “AUX”).  

• Maximum power cable length: 10 m (from power supply to router 01416).  

• Power cable section: 2x0.5 mm² up to 2x1.0 mm².  

• The ethernet line must be wired with a UTP (non-shielded) cable, CAT.5e or superior.  

• Maximum Ethernet cable length: 100 m.  

• The router 01416 must be wired to the IP video door entry system (via the ETH2 interface)  

according to the rules adopted for a standard IP video door entry system.  

• All electrical interfaces on the device are SELV. The device must therefore be installed in high-  

voltage-free SELV electrical panels; if present, the installer must guarantee double insulation  

between the high voltage and the SELV.  

Utilisateur final  

Il utilise les services du système portier-vidéo IP (appels vidéo des postes extérieurs, notifications,  

messages et alarmes) par les écrans tactiles locaux ou sur son APP et à distance, par le cloud.  

Fonctions disponibles sur l’écran tactile  

- Activation automatique poste extérieur  

- Ouverture électroserrure poste extérieur  

- Appels audio intercommunicants  

- Activation fonctions de l’installation (éclairage escalier, fonctions auxiliaires)  

- Répertoire de l’installation et menus favoris pour l'accès rapide  

- Messagerie vidéo configurable  

- Entrée pour sonnette palier  

- Support pour intégration CCTV  

- Configuration de le router 01416 dans le système portier-vidéo avec le logiciel Video Door IP  

Manager  

Viale Vicenza, 14  

36063 Marostica VI - Italy  

www.vimar.com  

49400909A0 05 2112  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	VIMAR 01416 Automation IP Video Entry System Router User Manual
Make	VIMAR
Language	English
Filetype	PDF (Download)
File size	0.74 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• VIMAR

Questions and Answers (0)

If you have any questions regarding VIMAR 01416 Automation IP Video Entry System Router User Manual, please ask here and describe the problem in detail.