westermo MRD-405 4G LTE Router User Guide
Configuration
Accessing and Using the Web Interface
All configuration of the MRD can be done via the web interface. In order to view the
web pages a computer with a fixed IP address, on the same sub-net as the MRD, will
need to be connected to one of the LAN ports.
The default IP settings of the MRD are:
• IP Address: 192.168.2.200
• Netmask: 255.255.255.0
The recommended IP settings for the PC used to configure the MRD Router:
• IP Address: 192.168.2.100
• Netmask: 255.255.255.0
• Default Gateway: 192.168.2.200
• Primary DNS: 192.168.2.200
Note: Although it is possible to connect the MRD directly to a Local Area Network
(LAN) it is recommend that the network configuration as described in this
section is performed prior to doing so. The DHCP server of the unit is by default
disabled.
Windows PC Network Settings
The following describes how to configure the network settings of a PC with Windows 7
so that it can access the MRD.
Note: This procedure will change the network settings of the Windows PC, if the PC is
connected to a network the connection should be removed before performing
the changes. To restore the network, settings of the PC record the current
settings at Step 7 in the following procedure, then when the MRD has been
configured, follow the procedure again and use the recorded values at Step 7.
1. Open the Control Panel by selecting Start > Control Panel.
2. Click the Network and Sharing Center icon.
3. Click Change Adapter Settings.
4. Double click the Network icon.
5. The Local Area Connection Status dialog box will be displayed, click the Properties
button.
6. The Local Area Connection Properties dialog box, as shown in Figure 1, will be
displayed
Click on Internet Protocol (TCP/IPv4) to highlight it and then click the Properties
button.
6623-2212
17
Figure 1
7. The Internet Protocol (TCP/IP)Properties dialog box, change the settings to match
those shown in Figure 2, and then click ”OK.
Figure 2
Note: If a web browser was open prior to making the network changes, then it will
need to be closed and re-started before attempting to connect to the MRD.
18
6623-2212
| General | Details |
|---|---|
| Name | westermo MRD-405 4G LTE Router User Guide |
| Make | westermo |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.42 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding westermo MRD-405 4G LTE Router User Guide, please ask here and describe the problem in detail.
westermo Merlin 4700 Series VDSL Cellular Router User Guide
westermo MRD-455-NA Cellular Router User Guide
Westermo Merlin 4100 Series Cellular Router User Guide
westermo Merlin 4700 Series Cellular Router User Guide
westermo 4400 Cellular Router User Guide
LINOVISION IOT-R32W Rugged and Versatile Cellular Router Instructions
DBIT AC1200 Dual Band WiFi Router Instructions
UBIQUITI UMR-US UniFi Mobile Router Installation Guide
dahua AX1500 Wi-Fi6 Wireless Router Instruction Manual
NETGEAR PR60X Pro 10G Multi Gigabit Dual WAN Pro Router Installation Guide
SEALEY CP20VTR 20V SV20 Series Cordless Trimming Router Instructions
FiberHome SR120CC Smart Router User Manual
BUFFALO WZR2-G300N Wireless Router User Guide
AirLive Wireless Series Wi-Fi AP Router User Manual
GL iNet XE2000 Dual SIM Wi-Fi 6 Router User Guide