Enertex KNX IP Secure Router User Manual
1164-EnertexKNXIPSecureRouter_US-6.odt, 2023-02-22
Seite 16 von 19
Read or configure the maximum length of the KNX TP telegrams. This may be necessary if
there is an incorrect implementation of a TP stack. In that case the ETS may try to use
telegrams with 248 bytes payload, but the TP device can not process (e.g. Zennio Z35i).
Default is 248 and should only be changed if necessary.
apdu [55..248]
# apdu
maximal len of a KNX telegram 248.
Usage: apdu [55 .. 248]
Read or configure maximum telegram rate (IP => TP); 50 T / s corresponds to 100% bus load.
tpratemax [5..50]
# tpratemax
no limit, sending with maximum performance to TP.
Usage: tpratemax [5 .. 50]
Shows various statistics on device and bus status
stats
uptime: 114 days, 2:19
KNX communication statistics:
TX to IP (all)..: 333729 (ca. 233 t/m)
TX to KNX.......: 23244 (ca. 16 t/m)
RX from KNX.....: 94559 (ca. 66 t/m)
Overflow to IP..: 0
Overflow to KNX.: 0
TX tunnel re-req: 260
TP bus voltage..: 28.95 V
TX TP rate......: 50 T/s (= 100 %)
Uptime: Runtime of the interface since last restart
TX to IP (all): Number of all telegrams sent on IP
TX to KNX: Number of all telegrams sent on KNX
RX from KNX: number of telegrams received from the KNX bus
Overflow to IP: Number of telegrams that could not be sent to IP
Overflow to KNX: Number of telegrams that could not be sent to the KNX bus
TX tunnel re-req: Number of telegrams that had to be repeated in the tunnel connections
TP bus voltage: Current bus voltage (at the time of calling stats)
TX TP rate: maximum telegram rate (TP)
Shows the bus load as follows:
busload
-------------------------------------------------
Measure | 1 min. | 5 min | 15 min | since start
-------------------------------------------------
RX Bit/s | 0035 | 0091 | 0080 | 0079
TX Bit/s | 0007 | 0006 | 0002 | 0004
RT Bit/s | 0042 | 0098 | 0083 | 0083
-------------------------------------------------
RX T/s | 00.26 | 00.94 | 00.70 | 00.69
TX T/s | 00.12 | 00.08 | 00.03 | 00.05
RT T/s | 00.38 | 01.02 | 00.73 | 00.75
-------------------------------------------------
RX % | 00.52 | 01.88 | 01.40 | 01.39
TX % | 00.24 | 00.16 | 00.07 | 00.11
RT % | 00.76 | 02.04 | 01.47 | 01.51
-------------------------------------------------
MaxR T/s | 08 | 08 | 24 | 29
MaxT T/s | 03 | 03 | 03 | 08
MxRT T/s | 08 | 08 | 24 | 29
-------------------------------------------------
Maximum load at 16:50:08 06.10.2020 (UTC)
Where RX is receive, TX is transmit, RT is the sum of receive and transmit according to this
table every minute, 5 minutes, 15 minutes, and since the device was started.
Bit/s shows the actual baud rate on the TP bus. It is the total of bytes of the application data
and offset of the KNX protocol layers.
The % load is related to 50 telegrams per second.
The maxima are recalculated in the given interval.
Enertex® Bayern GmbH – Ebermannstädter Straße 8 - 91301 Forchheim - Germany - mail@enertex.de
| General | Details |
|---|---|
| Name | Enertex KNX IP Secure Router User Manual |
| Make | Enertex |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.44 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding Enertex KNX IP Secure Router User Manual, please ask here and describe the problem in detail.
PROCEND M331 Cellular Router Installation Guide
TELTONIKA RUT955 LTE Router User Guide
D-Link G415 AX1500 4G Router User Guide
Cudy WR3000S AX3000 Gigabit Mesh WiFi 6 Router Installation Guide
Cudy WR1200 AC1200 Wi-Fi Router Installation Guide
TP-Link RM100 Router WiFi 4G LTE 300MBPS User Manual
TANGERINE DSL-AC68U Modem Router User Manual
TP-Link Archer AX53 AX3000 Gigabit Wi-Fi 6 Router User Guide
D-Link DWR-930M 4G LTE Mobile Router Installation Guide
ASUS RT-AX57 Dual Band WiFi Router User Guide