Enertex KNX IP Secure Router User Manual
1164-EnertexKNXIPSecureRouter_US-6.odt, 2023-02-22
Seite 6 von 19
ETS will throw an error message at the end. This is to be ignored, the assignment of the address
has nevertheless been made.
If no tunnel addresses are assigned in the application, all tunnels are set by the ETS to
15.15.255. Communication via the tunnel connection can then be considerably disturbed or not
possible.
If the device is integrated in a secure project, the ETS saves the parameterization of this particu-
lar device including secure parameters. If the device is reset to factory settings, the ETS (5.6 or
5.7) only addresses the device in encrypted form. Therefore, communication with the ETS can
no longer be established. In this case, only deleting the application and restarting the ETS will
help.
If an update of Windows runs in the background, strange phenomenon can occasionally occur
with the communication between the device and the ETS. In this case, wait for the end of the up-
date and restart Windows.
Topology
To insert the router into an ETS project, it must have an IP backbone. Example: the following
ETS topology:
Figure 1: Topology (left) and properties of the backbone
Lines:
1: Backbone Medium IP
1.1: Line Medium TP
In the Properties Diagram of the Backbone (NOTE: For this click on Topology, directly above
"Dynamic Folders", see Figure 1), you will find the settings for the Multicast of the Backbone.
Network latency (see Figure 1) can be changed if the routing is over a large distributed system.
In this case, increase the time constant.
The device is parameterized with the ETS 5.6.6 or higher. The KNX IP Secure Router supports
up to eight KNX (Secure) IP tunnel connections and can be used as a line or area coupler.
Enertex® Bayern GmbH – Ebermannstädter Straße 8 - 91301 Forchheim - Germany - mail@enertex.de
| General | Details |
|---|---|
| Name | Enertex KNX IP Secure Router User Manual |
| Make | Enertex |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.44 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding Enertex KNX IP Secure Router User Manual, please ask here and describe the problem in detail.
FIRSTNUM CPE C1 WiFi Router User Manual
LOGIC ML8 4G MiFi Router User Manual
Cudy LT500 4G LTE AC1200 Dual Band WiFi Router User Guide
ASUS RT-AX52 AX1800 AiMesh Wireless Router User Guide
Cradlepoint E102 Series Enterprise Router User Guide
D-Link R95 BE9500 Wi-Fi 7 Smart Router User Guide
cradlepoint E110 Enterprise Branch Router User Manual
ASUS TUF-AX5400 Dual Band WiFi 6 Router User Guide
Cudy LT18 4G LTE Dual Band WiFi 6 Gigabit Cellular Hotspot Router Installation Guide
D-Link DIR-882 EXO AC2600 MU-MIMO Wifi Router Installation Guide