Enertex KNX IP Secure Router User Manual
1164-EnertexKNXIPSecureRouter_US-6.odt, 2023-02-22
Seite 4 von 19
In the LAN socket two further LEDs are installed. The green indicates a connection to another IP
device or switch ("Link"), the yellow LED shows the IP data transfer.
Reset
If the device is to be reset to the factory settings, the PROG button on the front panel must be
pressed for 10 seconds. After this time, the red LED starts to flash - then the PROG key can be
released and the device carries out the reset to the delivery condition.
Additional application
From version 1.050 on, the firmware includes an additional application. This enables group com-
munication with a separate ETS application and a second physical address.
With this application it is possible to synchronize the bus with the current time and date via group
address. In addition, the application offers the possibility of linking encrypted (secure) and unen-
crypted (plain) group addresses via the device.
The manual for the additional application and the ETS application can be found in the download
Functional Overview
The device has the following functions:
•
KNX IP Secure
◦
◦
Eight independent KNXnet / IP tunnel connections
Communication via TCP or UDP KNX IP routing for communication between KNX
lines, areas and systems
◦
◦
◦
◦
KNX IP routing in encrypted (secure) mode.
KNX IP tunneling in encrypted (secure) mode.
Telegram forwarding and filtering according to physical address
Telegram forwarding and filtering according to group address with up to 62 filter
blocks
•
Displays
◦
LED displays for KNX communication, Ethernet communication and programming
mode
◦
◦
Power indicator
OLED display for status messages, parameter displays etc.
•
Special functions
◦
◦
◦
◦
◦
◦
Configuration via ETS and Telnet
SNTP server
Measurement of the TP bus voltage (Telnet, OLED display)
Maximum TP APDU packet length of the KNX bus (248 bytes)
Maximum TP packet length adjustable (Telnet) between 55 and 248 bytes (APDU)
Simulation of UDP tunnels for ETS communication (Telnet)
•
Performance
Specification of a max. TP data rate for writing KNX telegrams
◦
Enertex® Bayern GmbH – Ebermannstädter Straße 8 - 91301 Forchheim - Germany - mail@enertex.de
| General | Details |
|---|---|
| Name | Enertex KNX IP Secure Router User Manual |
| Make | Enertex |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.44 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding Enertex KNX IP Secure Router User Manual, please ask here and describe the problem in detail.
TP-Link 7106511948 Outdoor Router Installation Guide
AIRCONNECT BEC 8231 5G CBRS Outdoor Router Owner’s Manual
TP-Link ER8411 Omada VPN Router with 10G Ports Installation Guide
Acer W6 Predator Connect W6x Dual Band Wi-Fi 6 Router User Manual
Mercury Netcomm NF4V Fibre WiFi Gigabit Modem Router User Manual
Tenda 4G09V1.0 Wifi Router User Manual
ADVANTECH ICR-2701 Engineering Portal Cellular Router User Guide
TP-Link Archer BE550 Pro Tri-Band Wi-Fi 7 Router Instructions
DrayTek Vigor2927 Dual WAN Security Router User Guide
Red Fox 2 CNC Router Installation Guide