GRANDSTREAM HT812 Powerful 2 Port ATA with Gigabit NAT Router User Guide

Mozilla Firefox: version 53.0.2 or higher.  

Safari: version 5.1.4 or higher.  

Opera: version 44.0.2 or higher.  

Accessing the Web UI  

Via WAN port  

For the initial setup, the Web access is by default enabled when the device is using private IP and disabled when using public  

IP, and you cannot access the Web UI of your HT812/HT814 until it’s enabled, the following steps will show you how to enable  

it via IVR.  

1. Power your HT812/HT814 using PSU with the right specifications.  

2. Connect your analog phone to phone ports (FXS) of your HT812/HT814.  

3. Press *** (press the star key three times) to access the IVR menu and wait until you hear “Enter the menu option “.  

4. Press 12, the IVR menu will announce that the web access is disabled, press 9 to enable it.  

5. Reboot your HT812/HT814 to apply the new settings.  

Please refer to steps below if your HT812/HT814 is connected via WAN port:  

1. You may check your HT812/HT814 IP address using the IVR on the connected phone.  

Please see Obtain the HT812/HT814 IP address via the connected analogue phone  

2. Open the web browser on your computer.  

3. Enter the HT812/HT814’s IP address in the address bar of the browser.  

4. Enter the administrator’s password to access the Web Configuration Menu.  

The computer must be connected to the same sub-network as the HT812/HT814. This can be easily done by connecting the  

computer to the same hub or switch as the HT812/HT814  

Via LAN port  

Please refer to steps below if your HT812/HT814 is connected via LAN port:  

1. Power your HT812/HT814 using PSU with the right specifications.  

2. Connect your computer or switch directly to your HT812/HT814 LAN port.  

3. Open the web browser on your computer.  

4. Enter the default LAN IP address (192.168.2.1) in the address bar of the browser.  

5. Enter the administrator’s password to access the Web Configuration Menu.  

6. Make sure to reboot your device after changing your settings to apply the new configuration.  

Please make sure that your computer has a valid IP address on the range 192.168.2.x so you can access the web GUI of your  

HT812/HT814.  

Web UI Access Level Management  

There are two default passwords for the login page:  

User Level  

Password  

Web Pages Allowed  

End User Level  

123  

Only Status and Basic Settings  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	GRANDSTREAM HT812 Powerful 2 Port ATA with Gigabit NAT Router User Guide
Make	GRANDSTREAM
Language	English
Filetype	PDF (Download)
File size	MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• GRANDSTREAM

Questions and Answers (0)

If you have any questions regarding GRANDSTREAM HT812 Powerful 2 Port ATA with Gigabit NAT Router User Guide, please ask here and describe the problem in detail.