GRANDSTREAM HT812 Powerful 2 Port ATA with Gigabit NAT Router User Guide

Configuring HT812/HT814 Through Voice Prompts  

As mentioned previously, The HT812/HT814 has a built-in voice prompt menu for simple device configuration. Please refer to  

“Understanding HT812/HT814 Interactive Voice Prompt Response Menu” for more information about IVR and how to access  

its menu.  

DHCP MODE  

Select voice menu option 01 to allow the HT812/HT814 to use DHCP.  

STATIC IP MODE  

Select voice menu option 01 to allow the HT812/HT814 to enable the STATIC IP mode, then use option 02, 03, 04, 05 to set up  

IP address, Subnet Mask, Gateway and DNS server respectively.  

PPPOE MODE  

Select voice menu option 01 to allow the HT812/HT814 to enable the PPPoE mode. PPPoE Username and Password should be  

configured from web GUI.  

FIRMWARE SERVER IP ADDRESS  

Select voice menu option 13 to configure the IP address of the firmware server.  

CONFIGURATION SERVER IP ADDRESS  

Select voice menu option 14 to configure the IP address of the configuration server.  

UPGRADE PROTOCOL  

Select the menu option 15 to choose firmware and configuration upgrade protocol between TFTP, FTP, FTPS, HTTP and  

HTTPS. Default is HTTPS.  

FIRMWARE UPGRADE MODE  

Select voice menu option 17 to choose firmware upgrade mode among the following three options:  

“Always check, check when pre/suffix changes, and never upgrade”.  

WAN PORT WEB ACCESS  

Select voice menu option 12 to enable/disable web access from WAN port. Press 9 in this menu to toggle between enable /  

disable.  

Register a SIP Account  

The HT812/HT814 support 2 profiles which can be configured with 2 SIP accounts. Please refer to the following steps in order  

to register your accounts via web user interface  

1. Access your HT812/HT814 web UI by entering its IP address in your favorite browser.  

2. Enter your admin password (default: admin).  

3. Press Login to access your settings.  

4. Go to Profile (1 or 2) pages.  

5. In Profile tab, set the following:  

1. Account Active to Yes.  

2. Primary SIP Server field with your SIP server IP address or FQDN.  

3. Failover SIP Server with your Failover SIP Server IP address or FQDN. Leave empty if not available.  

4. Prefer Primary SIP Server to No or Yes depending on your configuration. Set to No if no Failover SIP Server is  

defined. If “Yes”, account will register to Primary SIP Server when failover registration expires.  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	GRANDSTREAM HT812 Powerful 2 Port ATA with Gigabit NAT Router User Guide
Make	GRANDSTREAM
Language	English
Filetype	PDF (Download)
File size	MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• GRANDSTREAM

Questions and Answers (0)

If you have any questions regarding GRANDSTREAM HT812 Powerful 2 Port ATA with Gigabit NAT Router User Guide, please ask here and describe the problem in detail.