Home > JUNIPER NETWORKS > Juniper NETWORKS ACX710 Universal Metro Router User Guide
Juniper NETWORKS ACX710 Universal Metro Router User Guide
13
Ensure that you have an Ethernet cable that has an RJ-45 connector at either end. Figure 11 on page
13 shows the RJ-45 connector of the Ethernet cable.
Figure 11: RJ-45 Connector on an Ethernet Cable
NOTE: You cannot use the management ports to perform the iniꢀal configuraꢀon of an ACX710
router. You must configure the management ports before you can successfully connect to the
ACX710 router using these ports. See No Link Title.
To connect an ACX710 router to a network for out-of-band management (see Figure 12 on page 13):
1. Connect one end of the Ethernet cable to one of the management ports.
2. Connect the other end of the cable to the management PC (see Figure 12 on page 13).
Figure 12: Connect an ACX710 Router to a Network for Out-of-Band Management
Connect an ACX710 Router to a Management Console
Ensure that you have an RJ-45 to DB-9 rollover cable available.
| General | Details |
|---|---|
| Name | Juniper NETWORKS ACX710 Universal Metro Router User Guide |
| Make | JUNIPER NETWORKS |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.28 MB |
If you have any questions regarding Juniper NETWORKS ACX710 Universal Metro Router User Guide, please ask here and describe the problem in detail.

Juniper NETWORKS SSR120 Router User Guide

Juniper NETWORKS SSR1300 Router User Guide

Juniper NETWORKS ACX Series Paragon Automation Router User Guide

Juniper NETWORKS PTX10003 Fixed Packet Transport Router User Guide

Juniper NETWORKS PTX10004 Ultra-Compact Modular Router User Guide

Juniper NETWORKS PTX10001-36MR Packet Transport Router User Guide

Juniper NETWORKS SSR1300 Smart Router User Guide

Juniper NETWORKS ACX7024 Cloud Metro Router User Guide

JUNIPER NETWORKS PTX10004 Packet Transport Router User Guide

Juniper NETWORKS ACX7509 Cloud Metro Router User Guide







































