mikrotik LHG 60G Series Wireless Router User Guide
Open the Ethernet door to connect an Ethernet cable to the Ethernet port, connect the other end of the
Ethernet cable to the included PoE injector;
Plug the PoE injector into your network switch;
Plug the included power supply into the PoE injector to start up the device;
Mount the devices on the mast or pole;
Align both units;
Default IP for the master unit: 192.168.88.2, slave unit: 192.168.88.3, user name: admin and password
is printed on the label, that can be found inside the device cover;
In case the IP connection is not available, please use the Neighbors tab and connect through MAC
address;
For LHG 60G models, default IP: 192.168.88.1, and there is no password;
Once connected configure the device, so it has an active Internet connection https://mt.lv/configuration;
Choose your country, to apply country regulation settings.
Safety Information:
Before you work on any MikroTik equipment, be aware of the hazards involved with electrical
circuitry, and be familiar with standard practices for preventing accidents. The installer should be
familiar with network structures, terms, and concepts.
Use only the power supply and accessories approved by the manufacturer, and which can be found in
the original packaging of this product.
This equipment is to be installed by trained and qualified personnel, as per these installation
instructions. The installer is responsible for making sure, that the Installation of the equipment is
compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the
device.
This product is intended to be mounted outdoors on a pole but can also be installed indoors. Please read
the mounting instructions carefully before beginning installation. Failure to use the correct hardware
and configuration or to follow the correct procedures could result in a hazardous situation for people
and damage to the system.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device.
Please use this product with care and operate at your own risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging
the power adapter from the power outlet.
| General | Details |
|---|---|
| Name | mikrotik LHG 60G Series Wireless Router User Guide |
| Make | Mikrotik |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.04 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding mikrotik LHG 60G Series Wireless Router User Guide, please ask here and describe the problem in detail.
mikrotik RB960PGS Hex PoE 5-Port Router User Manual
MikroTik Cloud Hosted Router User Guide
MikroTik RB750r2 hEX Lite Router User Guide
MikroTik C52iG-5HaxD2HaxD-TC Wireless Router User Guide
MikroTik RBcAPGi-5acD2nD-XL Wireless Router User Guide
MikroTik hAP ax³ Wireless Network Router User Manual
MikroTik wAP ac Wireless Router User Manual
MikroTik Chateau LTE18 ax Dual Band Wireless Router User Manual
MikroTik RBMetalG-52SHPacn Metal Wireless Router User Manual
MIKROTIK 2004-1G-12S+2XS Cloud Core Router User Manual
ASUS U18086 ROG GT-AXE11000 Wireless Router User Guide
D-Link DIR-836L Wireless N750 Dual Band Gigabit Router Installation Guide
Digital Yacht NeXuX Connect WiFi Router Installation Guide
ONEPLUS CTD05 Hub 5G Router User Guide
UBIQUITI UniFi Dream Router Instruction Manual
NETGEAR R6300 WiFi Router Instruction Manual
POOLEX WIFI-LINK Outdoor Wifi Antenna and 4G Router Instruction Manual
aparian A-CNTR ControlNet Router Module User Guide
WAVLINK AC1200 Dual Band Wi-Fi Extender/AP User Guide
westermo 4400 Cellular Router User Guide