Scribd HDA802B 6.5A Variable Speed Compact Router User Manual

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

1.25HP COMPACT ROUTER  

1258-500  

ASSEMBLY  

ATTENTION:  

Read the entire Important Safety Information section at the beginning of this  

manual Including all text under subheadings before set up or use of this product.  

TOOL SET UP  

ATTENTION:  

To prevent serious injury from accidental operation: make sure that the power  

performing any procedure in this section.  

CAUTION:  

• Do not tighten the collet nut without inserting a bit, or the collet cone will break.  

• Use only the wrenches provided with the tool.  

Insert the bit all the way into the collet cone and tighten the collet nut securely  

by pressing the shaft lock and using the provided wrench.  

To remove the bit, follow the installation procedure in reverse.  

INSTALLING THE ROUTER BIT  

1. Unplug the router from the electrical outlet.  

2. Release the locking lever and use the depth adjustment screw to move the  

base down to expose the collet nut.  

3. Press the spindle lock in to keep the spindle from turning.  

4. Using the large wrench included, loosen the collet nut, but do not remove.  

5. If there is already a bit in the collet cone, remove it.  

6. Push the shank end of the new bit (sold separately) into the opening in the collet  

nut. There may be some resistance, so make sure that it goes in all the way.  

7. While holding in the spindle lock, tighten the collet nut with the large wrench.  

ADJUSTING CUTTING DEPTH  

Set the depth of cut using the scale marked on the side of the Router.  

1. Install the router bit as previously described.  

2. Release the locking lever and use the Depth Adjustment Screw to move the Base  

down so the router bit is retracted within the Base.  

3. Place the Base on a flat surface, and slide the Router down in the Base until the  

tip of the bit contacts the work surface. Tighten the Locking Lever.  

4. The depth scale on the Housing now shows the starting position. This starting  

position will vary depending on the bit used.  

5. Add the desired depth of cut to the starting position. For example, if the starting  

position is 1/2" and the desired depth of cut is 1/4", the correct adjustment on  

the scale is 3/4".  

6. Release the Locking Lever, and use the Depth Adjustment Screw to move the  

Housing up until the scale shows the correct reading; in this example 3/4".  

Tighten the Locking Lever.  

10  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Scribd HDA802B 6.5A Variable Speed Compact Router User Manual
Make	Scribd
Language	English
Filetype	PDF (Download)
File size	1.2 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• Scribd

Questions and Answers (0)

If you have any questions regarding Scribd HDA802B 6.5A Variable Speed Compact Router User Manual, please ask here and describe the problem in detail.