Scribd HDA802B 6.5A Variable Speed Compact Router User Manual

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

GENERAL OPERATING INSTRUCTIONS  

1.  

2. Adjust the router speed to suit the working material and bit diameter. to adjust  

speed, turn the speed control knob from 1 (the slowest speed) to 6 (the fastest  

speed). Determine the optimum speed by testing on a scrap piece of material.  

3. Turn the power switch on and run the tool for about 10 seconds before routing to  

ensure that all moving parts are running smoothly, and there are no loose parts,  

rattles, or sparking that would indicate damage.  

4. When using the fence: cut parallel to the edge of the workpiece with the fence  

following the edge.  

5. When using a temporary guide: cut with the fence following the edge of the  

temporary guide.  

6. When making a circle cut: with the nail in place through the center hole of the  

fence, plunge the router bit into the workpiece and rotate the router in a circle  

around the nail.  

NOTE: The router bit rotates clockwise. Adjust for this while cutting:  

a. For most materials it is best to move the router from left to right as  

facing the workpiece.  

b. When cutting outside edges, move the router counterclockwise.  

When cutting inside edges, move the router clockwise.  

7.  

the tool indoors out of children’s reach.  

MAINTENANCE  

ATTENTION: To prevent serious injury from accidental operation: make sure  

outlet before performing any procedure in this section.  

To prevent serious injury from tool failure: do not use damaged equipment. If  

abnormal noise or vibration occurs, have the problem corrected before further use.  

CLEANING, MAINTENANCE, AND LUBRICATION  

1. Before each use, inspect the general condition of the tool. Check for:  

• loose hardware  

• misalignment or binding of moving parts  

• damaged cord/electrical wiring  

• cracked or broken parts  

2. After use, wipe external surfaces of the tool with clean cloth.  

3. Periodically, wear ANSI-approved safety goggles and NIOSH-approved  

breathing protection and blow dust out of the motor vents using dry  

compressed air.  

4. Periodically wipe the Collet, Collet Cone, and router bits with a light oil  

to prevent rust.  

13  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Scribd HDA802B 6.5A Variable Speed Compact Router User Manual
Make	Scribd
Language	English
Filetype	PDF (Download)
File size	1.2 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• Scribd

Questions and Answers (0)

If you have any questions regarding Scribd HDA802B 6.5A Variable Speed Compact Router User Manual, please ask here and describe the problem in detail.