Scribd HDA802B 6.5A Variable Speed Compact Router User Manual

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

7. Make a test cut on a piece of scrap material to ensure that the  

adjustment is correct.  

INSTALLING THE FENCE  

Use the Fence to make cuts parallel to the edge  

of a workpiece, or following a guide clamped onto  

the workpiece.  

1. Install the fence bracket with the fence facing  

Inward, and the flanges down.  

Attachment  

knob  

2. Using the attachment knob, attach the fence  

Assembly to the router, as shown in Figure A.  

3. After measuring the proper distance from the  

Router bit to the fence, tighten the fence using  

The wing nut.  

Fence  

Wing  

nut  

4. Adjust the cutting depth as described in  

Adjusting cutting depth on page 10.  

Fig. a: Installing the Fence  

5. Make a test cut on a piece of scrap material to  

Ensure that the adjustment is correct.  

SETTING UP A TEMPORARY GUIDE  

Clamp a temporary guide to the workpiece to  

make a straight cut which does not parallel the  

edge of the workpiece.  

Attachment  

knob  

Wing  

nut  

1. Clamp a suitable straight board across the  

workpiece parallel to the desired location of  

the cut.  

Fence  

Bracket  

2. Install the fence assembly with the fence  

facing Outward and up, as shown in Figure B.  

Fence  

Fig. b: Fence installation for  

use with temporary Guide  

3. After measuring the proper distance from  

the Router bit to the temporary guide, tighten  

the Fence using the attachment knob and  

wing nut.  

4. Make a test cut on a piece of scrap material  

to ensure that the adjustment is correct.  

Attachment  

knob  

CIRCLE CUTTING  

Center  

hole  

Wing  

nut  

Use the center hole in the Fence as a pivot point  

when cutting circles.  

1. Install the fence as shown in Figure c.  

Fence  

Bracket  

Fence  

2. Set the distance from the center hole in the  

Fence to the far edge of the router bit equal to  

the radius of the circle. Lock the fence in place  

with the attachment knob and wing nut.  

Fig. c: Fence installation  

for circle cutting  

3. Align the centre hole in the fence with the center point of the circle.  

4. Drive a nail through the centre hole to secure. The fence in place.  

11  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Scribd HDA802B 6.5A Variable Speed Compact Router User Manual
Make	Scribd
Language	English
Filetype	PDF (Download)
File size	1.2 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• Scribd

Questions and Answers (0)

If you have any questions regarding Scribd HDA802B 6.5A Variable Speed Compact Router User Manual, please ask here and describe the problem in detail.