Scribd HDA802B 6.5A Variable Speed Compact Router User Manual

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

1.25HP COMPACT ROUTER  

1258-500  

5. Over time, if the performance of the tool diminishes, or it stops working  

completely, it may be necessary to replace the Carbon Brushes.  

This procedure must be completed by a qualified technician.  

6.  

ATTENTION: If the supply cord of this power tool is damaged, it must  

be replaced only by a qualified service technician.  

TROUBLESHOOTING  

Problem  

Possible Causes  

Likely Solutions  

Tool wil not start  

1. Cord not connected.  

2. No power at outlet.  

1. Check that cord is plugged in.  

2. Check power at outlet. If outlet is  

3. Tool's thermal reset breaker  

tripped (if equipped)  

breaker. If breaker is tripped, make sure  

circuit is right capacity for tool and circuit  

has no other loads.  

4. Internal damage or wear. Carbon  

brushes or Power Switch, for  

example.)  

button on tool  

4. Have technician service tool.  

Tool operates  

slowly  

1. Forcing tool to work too fast.  

1. Allow tool to work at its own rate.  

2. Extension cord too long or cord  

diameter too small.  

2. Eliminate use of extension cord. If an  

extension cord is needed, use one with the  

proper diameter for its length and load.  

See Extension Cords in Grounding section  

on page 6.  

Performance  

decreases over  

time  

1. Carbon brushes worn or  

damaged.  

1. Have qualified technician replace brushes.  

2. Use sharp bits. Replace as needed.  

2. Router bit dull or damaged.  

Excessive noise  

or rattling  

Internal damage or wear (Carbon  

brushes or bearings, for example)  

Have technician service tool.  

Overheating  

1. Forcing tool to work too fast.  

2. Accessory misaligned.  

1. Allow tool to work at its own rate.  

2. Check and correct accessory to fence and/  

or table alignment.  

3. Router bit dull or damaged.  

4. Blocked motor housing vents.  

3. Use sharp bits. Replace as needed.  

4. Wear ANSI-approved safety goggles and  

NIOSH-approved dust mask/respirator  

while blowing dust out of motor using  

compressed air.  

5. Motor being strained by long or  

small diameter extension cord.  

5. Eliminate use of extension cord. If an  

extension cord is needed, use one with the  

proper diameter for its length and load.  

See Extension Cords in Grounding section  

of page 6.  

Follow all safety precautions whenever diagnosing or servicing the tool.  

Disconnect power supply before service.  

14  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Scribd HDA802B 6.5A Variable Speed Compact Router User Manual
Make	Scribd
Language	English
Filetype	PDF (Download)
File size	1.2 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• Scribd

Questions and Answers (0)

If you have any questions regarding Scribd HDA802B 6.5A Variable Speed Compact Router User Manual, please ask here and describe the problem in detail.