Scribd HDA802B 6.5A Variable Speed Compact Router User Manual

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

1.25HP COMPACT ROUTER  

1258-500  

WORKPIECE AND WORK AREA SET UP  

1. Designate a work area that is clean and well lit. The work area must not allow  

access by children or pets to prevent distraction and injury.  

2. Route the power cord along a safe route to reach the work area without creating  

a tripping hazard or exposing the power cord to possible damage. The power  

cord must reach the work area with enough extra length to allow free movement  

while working.  

3. Secure loose workpieces using a vise or clamps (not included) to prevent  

movement while working.  

4. There must not be objects, such as utility lines, nearby that will present a hazard  

while working.  

OPERATION  

ROCKER “ON/OFF” SWITCH  

The compact router motor is turned “ON” and “OFF” with the rocker switch located  

on the top cap of the motor housing. The left side of the rocker switch (as you face  

To turn the motor “ON”: Push the rocker switch to the left side marked “I”. To turn  

the motor “OFF”: Push the rocker switch to the right side marked “O”.  

1. Always hold the router and cutting bit away from the workpiece when turning  

the switch “ON.”  

2. Contact the workpiece with the router and cutting bit only after the router  

has fully reached the selected speed.  

3. Remove the router and cutting bit from the workpiece only after turning the  

router motor “OFF” and after the cutting bit has come to a complete stop.  

SOFT START & CONSTANT POWER FEATURES  

Soft Start Feature  

The soft start feature minimizes torque twist by limiting the speed at which  

the motor starts. This increases the motor’s life.  

Constant Power feature  

This tool features constant response circuitry to maintain speed under load.  

VARIABLE SPEED CONTROL DIAL  

The variable speed control feature allows the user to set the motor speed to  

the cutting bit size and the workpiece-material hardness for an improved finish  

and extended bit life.  

The tool speed can be changed by turning the speed adjusting dial to a given  

number setting from 1 to 6. Higher speed is obtained when the dial is turned in  

the direction of number 6. And lower speed is obtained when it is turned in the  

direction of number 1. This allows the ideal speed to be selected for optimum  

material processing, i.e. the speed can be correctly adjusted to suit the material  

and bit diameter.  

12  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Scribd HDA802B 6.5A Variable Speed Compact Router User Manual
Make	Scribd
Language	English
Filetype	PDF (Download)
File size	1.2 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• Scribd

Questions and Answers (0)

If you have any questions regarding Scribd HDA802B 6.5A Variable Speed Compact Router User Manual, please ask here and describe the problem in detail.