TP-Link TD-W9970 300Mbps Wireless N VDSL ADSL Modem Router User Guide

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

76

77

78

79

80

81

82

83

84

85

86

87

88

89

90

91

92

93

94

95

96

97

98

99

100

101

102

103

104

105

106

107

108

109

110

Chapter 2  

Connect the Hardware  

2. 2. Connect Your Modem Router  

Follow the steps below to connect your modem router.  

1. Connect the DSL line and power adapter. The electrical outlet shall be installed  

near the device and shall be easily accessible.  

3

Connect the power adapter to the  

modem router and push in to turn on  

the modem router.  

Power Adapter  

Modem Router  

Phone Jack  

1

Connect the DSL splitter to the  

phone jack.  

2

Connect the modem router  

to the DSL splitter.  

L I N E  

MODEM  

PHONE  

4

Verify that the hardware connection is  

correct by checking these LEDs.  

DSL Splitter  

Power  

On  

DSL  

On  

Wi-Fi  

On  

Notes:  

1) The DSL LED  

stabilize.  

2) If the Wi-Fi LED  

takes about 1 to 2 minutes to  

is off, please press the WiFi  

button on the rear panel for about 1 second, then  

the LED should turn stable in a few seconds.  

Connect to the phone (Optional)  

2. Connect your computer to the modem router.  

Method 1: Wired  

Connect your computer’s Ethernet port to the LAN port on the modem router via the  

Ethernet cable.  

Method 2: Wirelessly  

Use the default SSID (Wireless Network Name) and Wireless Password printed on the  

product label of the modem router to connect wirelessly.  

Method 3: Use the WPS button  

Wireless devices that support WPS, including Android phones, tablets, most USB  

network cards, can be connected to your router through this method. (WPS is not  

supported by iOS devices.)  

Note:  

The WPS function cannot be configured if the wireless function of the router is disabled. Also, the WPS function will be  

disabled if your wireless encryption is WEP. Please make sure the wireless function is enabled and is configured with the  

appropriate encryption before configuring the WPS.  

9

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	TP-Link TD-W9970 300Mbps Wireless N VDSL ADSL Modem Router User Guide
Make	TP-Link
Language	English
Filetype	PDF (Download)
File size	2.17 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• TP-Link

Questions and Answers (0)

If you have any questions regarding TP-Link TD-W9970 300Mbps Wireless N VDSL ADSL Modem Router User Guide, please ask here and describe the problem in detail.