TP-Link TD-W9970 300Mbps Wireless N VDSL ADSL Modem Router User Guide

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

76

77

78

79

80

81

82

83

84

85

86

87

88

89

90

91

92

93

94

95

96

97

98

99

100

101

102

103

104

105

106

107

108

109

110

Chapter 13  

Specify Your Network Settings  

1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you  

set for the router.  

2. Go to Advanced > Network > LAN Settings page and select IPv4.  

Note:  

If you have created an interface group, you can configure different IPv4 LAN settings for the default and created interface  

groups.  

3. Select DHCP to enable the DHCP function and select DHCP Server.  

4. Specify the IP Address Pool, the start address and end address must be on the  

same subnet with LAN IP. The modem router will assign addresses within this  

specified range to its clients. It is from 192.168.1.100 to 192.168.1.199 by default.  

5. Enter a value for the Address Lease Time. The Address Lease Time is the amount of  

time in which a DHCP client can lease its current dynamic IP address assigned by the  

modem router. After the dynamic IP address expires, the user will be automatically  

assigned a new dynamic IP address. The default is 1440 minutes.  

6. Keep the rest of the settings as default and click Save.  

Note:  

1. The modem router can be configured to work as a DHCP Relay. A DHCP relay is a computer that forwards DHCP data  

between computers that request IP addresses and the DHCP server that assigns the addresses. Each of the device’s  

interfaces can be configured as a DHCP relay. If it is enabled, the DHCP requests from local PCs will be forwarded to  

the DHCP server that runs on WAN side.  

2. You can also appoint IP addresses within a specified range to devices of the same type by using Condition Pool  

feature. For example, you can assign IP addresses within the range (192.168.1.50 to192.168.1.80) to Camera devices,  

thus facilitating the network management. Enable DHCP feature and configure the parameters according to your  

situation on the Advanced > Network > LAN Settings page.  

13. 2. 3. Reserve LAN IP Addresses  

You can view and add a reserved address for a client. When you specify an IP address  

for a device on the LAN, that device will always receive the same IP address each time  

when it accesses the DHCP server. If there are some devices in the LAN that require  

67  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	TP-Link TD-W9970 300Mbps Wireless N VDSL ADSL Modem Router User Guide
Make	TP-Link
Language	English
Filetype	PDF (Download)
File size	2.17 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• TP-Link

Questions and Answers (0)

If you have any questions regarding TP-Link TD-W9970 300Mbps Wireless N VDSL ADSL Modem Router User Guide, please ask here and describe the problem in detail.