trend T18S-DS 18V Cordless 1-4 Inch Router Instructions
EN - T18S/DS
EN - T18S/DS
Regardless of whether a shipment is considered excepted
or fully regulated, it is the shipper’s responsibility to
consult the latest regulations for packaging, labelling/
marking and documentation requirements.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
• Insert battery pack into the charger as described in the
charger section of this manual.
Discard the battery pack with due care for the
environment.
Selecting the Sanding Sheet
Depending on the material to be worked and the
required rate of material removal, different sanding
sheets are available.
• This product is not intended for use by persons
(including children) suffering from diminished physical,
sensory or mental abilities; lack of experience,
knowledge or skills unless they are supervised by a
person responsible for their safety. Children should
never be left alone with this product.
The information provided in this section of the manual
is provided in good faith and believed to be accurate
at the time the document was created. However, no
warranty, expressed or implied, is given. It is the buyer’s
responsibility to ensure that its activities comply with the
applicable regulations.
Do not incinerate the battery pack.
ITEMS ENCLOSED
1 x Detail sander
1 x Dust bag
1 x Dust spout adaptor
3 x Abrasive sheet
1 x Instruction manual
Material
Application
Grit Type
Grit Size
Wood
Fast levelling and
heavier removable
stripping
Extra Coarse
40
ASSEMBLY AND ADJUSTMENTS
Storage Recommendations
The best storage place is one that is cool and dry
away from direct sunlight and excess heat or cold. For
optimum battery performance and life, store battery
packs at room temperature when not in use.
Wood
Wood
For levelling stock
and heavy stock
removal
Coarse
60/80
120
WARNING: To reduce the risk of serious
personal injury, turn tool off and disconnect
battery pack before making any adjustments or
removing/ installing attachments or accessories.
An accidental start-up can cause injury.
NOTE: Battery packs, chargers and kit boxes are not
included with B models.
For moderate
sanding and
stock removal
preparation prior
to painting
Medium
• Check for damage to the tool, parts or accessories
which may have occurred during transport.
For long storage, it is recommended to store a fully
charged battery pack in a cool, dry place out of the
charger for optimal results.
• Take the time to thoroughly read and understand this
manual prior to operation.
NOTE: Battery packs should not be stored completely
depleted of charge. The battery pack will need to be
recharged before use.
WARNING: Use only Trend battery packs
Wood
For final sanding
preparation prior
to paint removal
or light stock
Fine
150/180
and chargers.
MARKINGS ON TOOL
The following pictograms are shown on the tool:
Battery Charge Level Status
- (Fig. 2 – 2a)
To display the amount of charge left in the battery, press
the charge level indicator button
removal
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual, the
labels on the charger and the battery pack may show the
following pictographs: -
Wood
Paint
For removing
small
imperfections
Extra Fine
240
40
Read instruction manual before use.
Wear ear protection.
For heavier
removable
stripping
Extra Coarse
NOTE: The battery charge level indicator is only an
indication of the charge left on the battery pack. It does
not indicate tool functionality and is subject to variation
based on product components, temperature and end-
user application.
Read instruction manual before use.
Wear eye protection.
Paint
Paint
Paint
For fast paint
removal
Coarse
Medium
Fine
60/80
120
Date Code Position
The year of manufacture is on the rating plate.
For sanding
primer
See Technical Data for charging time.
Battery charging.
Inserting and Removing the Battery
For final sanding
of primers before
coating
150/180
DESCRIPTION OF PARTS - (Fig. 1)
A. Hand grip
B. Main body
C. Base pad
D. On / Off button
E. Dust extraction outlet
F. Dust bag
G. Battery location
H. Dust spout
Pack from the Tool - (Fig. 3 – 3a)
NOTE: Make sure your battery pack is fully charged.
Battery charged.
Battery defective.
Paint
Initial sanding
between paint and
stain coats
Extra Fine
240
NOTE: To avoid serious personal injury, always remove
the battery pack and keep hands clear of the lock button
when carrying or transporting the tool.
Delay charge (Battery cooling or too cold battery).
Attaching Sanding Sheet
Your sander is designed to use third sheet sanding pads,
attached with hook & loop.
Do not probe with conductive objects.
Do not charge damaged battery packs.
Do not expose to water.
Improper installation of the battery pack can cause
damage to internal components.
I. Sanding sheet
Inserting the Battery Pack into
the Tool - (Fig. 3)
• Align the battery pack with the rails inside the sander’s
battery port.
Attaching Hook & Loop Sanding Sheet
to the Sanding Pad - (Fig. 5)
• Turn the sander over so that the sanding pad is facing
upward.
INTENDED USE
This cordless sander has been designed for sanding
wood, metal, plastics and painted surfaces.
Have defective cords replaced immediately.
Charge only between 4ºC and 40ºC.
Only for indoor use.
• Slide it into the battery port until the battery pack is
firmly seated and ensure that you hear the lock snap
into place.
DO NOT use under wet conditions or in the presence of
flammable liquids or gases.
• Clean the dust from the sanding pad face.
• Align the holes and place the sanding sheet directly on
top of the pad.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators
use this tool.
Removing the Battery Pack from
the Tool - (Fig. 3a)
• Press the release button and firmly pull the battery
pack out of the battery port.
• To remove the sanding sheet grip the edge of the
sanding sheet and pull until it detaches from the base
pad.
-12-
-13-
| General | Details |
|---|---|
| Name | trend T18S-DS 18V Cordless 1-4 Inch Router Instructions |
| Make | trend |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.09 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding trend T18S-DS 18V Cordless 1-4 Inch Router Instructions, please ask here and describe the problem in detail.
trend T1ETS Electric Trim Router Instruction Manual
trend Router Cutter Safety Instructions
trend T8EK Electric Router Instruction Manual
VIMAR 01416 Automation IP Video Entry System Router User Manual
ASUS RTAX6P00 ZenWiFi Hybrid MoCA Mesh Router User Manual
Isage VU202R Portable Small Wireless Router Instructions
MobileMark TX54-A106 LTE Advanced Cellular Router User Manual
triton TMNRTR Electric Router Instruction Manual
JUNIPer SSR120 Session Smart Router User Guide
APRISM MI12 Wi-Fi 6 Dual Radio Router User Guide
ASUS RP-AX56 Dual Band Wireless Router User Guide
Cudy LT400 Outdoor 4G Wi-Fi Outdoor Router Installation Guide
Cudy LT500 4G LTE AC1200 Dual Band WiFi Router User Guide