triton TMNRTR Electric Router Instruction Manual
Template & guide bush routing
See Fig. XXII and XXIII
Lubrication
•
All the bearings in this tool are lubricated with a sufficient
amount of high-grade lubricant for the life of the unit under
normal conditions. Therefore, no further lubrication is required
•
•
See ‘Fitting a guide bush for use with templates & jigs’
Template patterns (Fig. XXII (a)) are used with a Guide Bush
(not supplied) (49) to allow the Router (1) to carve a pattern
in the workpiece (Fig. XXII (b)) and are used for consistent,
repeatable shapes
Brushes
•
Over time the carbon brushes inside the motor may become
worn
•
When using a template and Guide Bush, the cut on the final
workpiece will differ from the space in the template, and the
Offset (Fig. XXIII (c)) of the Guide Bush must be considered prior
to cutting
•
Excessively worn brushes may cause loss of power, intermittent
failure, or visible sparking
To replace the brushes (Fig. XXV):
1. Loosen the Brush Access Covers (12) with a flat tip screwdriver
2. Use the screwdriver to retrieve the brushes
•
•
To work out the Offset, use this formula: Offset = Guide Bush
outer diameter - Router Bit (48) diameter
Template patterns and jigs can be made out of a variety of
materials such as hardboard, plywood, plastic or metal
3. Replace both brushes by aligning the rectangular shape of the
brush with the slot then inserting
Table-mounted operation
4. Replace the Brush Access Covers and tighten with a flat tip
•
Fitting and operating this router on a compatible router table
should be carried out in accordance with the instructions
supplied with the router table
screwdriver
Note: There may be some sparking after installing new brushes
until the brushes have been bedded. This should happen normally
with short bursts of regular use.
•
•
Ensure the Router (1) is fitted to the Plunge Base (9) if using in a
compatible router table
A Triton Table Height Winder engages with the Table Height
Micro Winder Connector (32) for quick and easy above-the-table
height adjustment when the router is table mounted, and there
is an access hole for the Height Winder
Contact
For technical or repair service advice, please contact the helpline on
(+44) 1935 382 222
Web: www.tritontools.com
Accessories
UK Address:
•
•
A full range of accessories, including router bits and guide
bushes, is available from your Triton stockist
Toolstream Ltd.
Boundary Way
Spare parts can be obtained from toolsparesonline.com
Lufton Trading Estate
Yeovil, Somerset
BA22 8HZ, United Kingdom
Maintenance
WARNING: ALWAYS disconnect from the power supply before
EU Address:
carrying out any inspection, maintenance or cleaning.
Toolstream B.V.
General inspection
Hogeweg 39
5301 LJ Zaltbommel
The Netherlands
•
•
Regularly check that all the fixing screws are tight
Prior to each use, inspect the supply cord of the tool for signs of
damage or wear. Repairs should be carried out by an authorised
Triton service centre. This advice also applies to extension cords
used with this tool
Storage
•
Store this tool in the supplied case, in a secure, dry location out
of the reach of children
Cleaning
•
Keep your tool clean at all times. Dirt and dust will cause
internal parts to wear quickly and shorten the tool’s service life
Disposal
•
Clean the body of the tool with a soft brush, or dry cloth. If
available, use clean, dry, compressed air to blow through the
ventilation holes
Always adhere to national regulations when disposing of power
tools that are no longer functional and are not viable for repair.
•
•
Do not dispose of power tools, or other waste electrical and
EN
•
•
Clean the tool casing with a soft, damp cloth using a mild
electronic equipment (WEEE) with household waste
detergent. Do not use alcohol, petrol or strong cleaning agents
Contact your local waste disposal authority for information on
the correct way to dispose of power tools
Never use caustic agents to clean plastic parts
20
| General | Details |
|---|---|
| Name | triton TMNRTR Electric Router Instruction Manual |
| Make | TRITON |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.45 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding triton TMNRTR Electric Router Instruction Manual, please ask here and describe the problem in detail.
triton TWX7 Router Table Module Instruction Manual
RGBlink 202304030620516871 Bond 6 Bonding Network Router User Guide
TP-Link Archer AX12 Dual Band WiFi 6 Router Installation Guide
Chosen Selective EL988 CS Dual Band Global Mifi Router User Manual
ExpressVPN AXG1800 Wi-Fi 6 VPN Router User Manual
ASUS ExpertWiFi EBM68 AX7800 Tri Band WiFi Router User Guide
HIKVISION AX1500 Pro WiFi Router User Guide
COBALT WAVE RTR-64×64 Router User Manual
porodo PD-4GCPMF-BK 4G/LTE Home and Outdoor Portable Router Instruction Manual
GLOBAL TELECOM TITAN 5000 5G NR and Wi-Fi 6 Router User Guide
TP-Link BE550PROV2 BE9700 Tri-Band Wi-Fi 7 Router Installation Guide