Home > TRITON > triton TMNRTR Electric Router Instruction Manual

triton TMNRTR Electric Router Instruction Manual

WARNING: User exposure to tool vibration can result in loss  
of sense of touch, numbness, tingling and reduced ability to grip.  
Long-term exposure can lead to a chronic condition. If necessary,  
limit the length of time exposed to vibration and use anti-vibration  
gloves. Do not operate the tool with hands below a normal  
comfortable temperature, as vibration will have a greater effect.  
Use the figures provided in the specification relating to vibration to  
calculate the duration and frequency of operating the tool.  
Max cutter diameter:  
Max cutter shank:  
Plunge adjustment:  
30mm  
8mm  
1) Free plunge  
2) Table height winder  
3) Micro winder  
Plunge range:  
0-40mm  
0-130mm  
8mm  
Sound and vibration levels in the specification are determined  
according to international standards. The figures represent normal  
use for the tool in normal working conditions. A poorly maintained,  
incorrectly assembled, or misused tool, may produce increased  
levels of noise and vibration. www.osha.europa.eu provides  
information on sound and vibration levels in the workplace that  
may be useful to domestic users who use tools for long periods  
of time.  
Parallel fence range:  
Fence rod diameter:  
Dust extraction port  
dimensions:  
Inner:  
Outer:  
35mm  
40mm  
The declared vibration total value has been measured in  
accordance with a standard test method and may be used for  
comparing one tool with another. The declared vibration total value  
may also be used in a preliminary assessment of exposure.  
Insulation class:  
Cord length:  
3m  
Ingress protection:  
Dimensions (L x W x H):  
IP20  
WARNING: The vibration emission during actual use of the  
power tool can differ from the declared total value depending on  
the ways in which the tool is used. There is the need to identify  
safety measures to protect the operator that are based on an  
estimation of exposure in the actual conditions of use (taking  
account of all parts of the operating cycle such as the times when  
the tool is switched off and when it is running idle in addition to  
the trigger time).  
with plunge base: 290 x 280 x 150mm  
with trimmer base: 260 x 150 x 96mm  
no base: 245 x 80 x 125mm  
2.9kg  
Weight:  
Carefully read and understand this manual and any label attached  
to the tool before use. Keep these instructions with the product for  
future reference. Ensure all persons who use this product are fully  
acquainted with this manual.  
As part of our ongoing product development, specifications of  
Triton products  
may alter without notice.  
Even when used as prescribed it is not possible to eliminate all  
residual risk factors. Use with caution. If you are at all unsure of the  
correct and safe manner in which to use this tool, do not attempt  
to use it.  
Sound & vibration information  
Sound pressure LPA  
Sound power LWA  
Uncertainty K  
85dB(A)  
96dB(A)  
3dB  
General Power Tool Safety Warnings  
WARNING: Read all safety warnings, instructions,  
illustrations and specifications provided with this power tool.  
Failure to follow all instructions listed below may result in electric  
shock, fire and/or serious injury.  
Weighted vibration ah  
Uncertainty K  
6.167m/s²  
1.5m/s²  
The sound intensity level for the operator may exceed 85dB(A)  
and sound protection measures are necessary.  
Save all warnings and instructions for future reference.  
The term “power tool” in the warnings refers to your  
mains-operated (corded) power tool or battery-operated (cordless)  
power tool.  
WARNING: Always wear ear protection where the sound level  
exceeds 85dB(A) and limit the time of exposure if necessary. If  
sound levels are uncomfortable, even with ear protection, stop  
using the tool immediately and check the ear protection is correctly  
fitted and provides the correct level of sound attenuation for the  
level of sound produced by your tool.  
EN  
1) Work area safety  
a) Keep work area clean and well lit. Cluttered or dark areas  
invite accidents.  
b) Do not operate power tools in explosive atmospheres, such  
as in the presence of flammable liquids, gases or dust.  
Power tools create sparks which may ignite the dust or fumes.  
13  
GeneralDetails
Nametriton TMNRTR Electric Router Instruction Manual
MakeTRITON
LanguageEnglish
FiletypePDF (Download)
File size1.45 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

If you have any questions regarding triton TMNRTR Electric Router Instruction Manual, please ask here and describe the problem in detail.

Leave a Reply

Your email address will not be published. Required fields are marked *

7 + 18 =

triton TWX7 Router Table Module Instruction Manual
triton TWX7 Router Table Module Instruction Manual

triton TMNRTR Electric Router Instruction Manual