Home > UfiSpace > UfiSpace S9500-30XS Gateway Router Installation Guide

UfiSpace S9500-30XS Gateway Router Installation Guide

2. Check for serial control availability.  
Disable any serial communication programs running on the computer such as synchronization  
programs to prevent interference.  
3. Launch a terminal emulator.  
Open a terminal emulator application such as HyperTerminal (Windows PC), Putty or TeraTerm  
and configure the application. The following settings are for a Windows environment (other  
operating systems will vary):  
Baud rate: 115200 bps  
Data bits: 8  
Parity: None  
Stop bits: 1  
Flow control: None  
4. Login to the device.  
After the connection is established, a prompt for the username and password displays. Enter  
the username and password to access the CLI. The username and password should be provided  
by the Network Operating System (NOS) vendor.  
S950030XS Hardware Installation Guide | 21  
12 Cable Connections  
Connecting the USB Extender Cable  
Connect the USB 2.0 A Type plug (male connector) into the USB port (female connector) located on  
the front panel of the router. The USB port is a maintenance port.  
Figure 29.  
Connecting a Cable to the ToD Interface  
The maximum length of the straightthrough Ethernet cable should not be  
more than 3 meters.  
1. Connect one end of a straightthrough Ethernet cable to the GNSS unit  
2. Connect the other end of the straightthrough Ethernet cable to the port marked “TOD”  
located on the front panel of the router.  
Figure 30.  
S950030XS Hardware Installation Guide | 22  
GeneralDetails
NameUfiSpace S9500-30XS Gateway Router Installation Guide
MakeUfiSpace
LanguageEnglish
FiletypePDF (Download)
File size0.75 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

If you have any questions regarding UfiSpace S9500-30XS Gateway Router Installation Guide, please ask here and describe the problem in detail.

Leave a Reply

Your email address will not be published. Required fields are marked *

2 − two =

ufiSpace S9600-72XC Router Installation Guide
ufiSpace S9600-72XC Router Installation Guide
UfiSpace S9600-64X 100G Aggregation Router Installation Guide
UfiSpace S9600-64X 100G Aggregation Router Installation Guide
UfiSpace S9600-32X 100G Aggregation Router Installation Guide
UfiSpace S9600-32X 100G Aggregation Router Installation Guide
UfiSpace S9501-28SMT Gateway Router Installation Guide
UfiSpace S9501-28SMT Gateway Router Installation Guide

UfiSpace S9500-30XS Gateway Router Installation Guide