UfiSpace S9500-30XS Gateway Router Installation Guide
•
The S9500‐30XS supports various types of receiver frequency types, including GPS L1C/A,
GLONASS L1OF, BeiDou B1, and Galileo E1B/C.
•
•
The minimum sensitivity of the receiver frequency (RF) is ‐166dBm.
The S9500‐30XS supports both passive and active GNSS antennas, and will automatically
detect which type of antenna is installed.
•
If the received signal strength is lower than 30db, the GNSS receiver will fail to produce
accurate location estimates.
To optimize antenna performance, it is highly recommended to choose a roof or top floor that is
free from any signal blockage or obstruction.
Read the following guidelines before installing an active antenna:
• When an active antenna is installed, the S9500‐30XS can supply up to 5V DC/150mA on the
GNSS port.
• If any GNSS amplifier, DC‐blocked or cascaded splitter is inserted, the GNSS detection
function might be affected, resulting in GNSS satellite clock errors.
• We recommend that you use an active antenna equipped with 50 ohm impedance
matching, 5V DC power supply capable, max. NF 1.5dB and 35~42dB internal LNA gain to
get a strong enough signal strength in various weather conditions.
• To prevent damages caused by power surges or lightning strikes, ensure a surge protector
is attached to the GNSS antenna.
Figure 32.
Figure 33.
S9500‐30XS Hardware Installation Guide | 26
| General | Details |
|---|---|
| Name | UfiSpace S9500-30XS Gateway Router Installation Guide |
| Make | UfiSpace |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.75 MB |
If you have any questions regarding UfiSpace S9500-30XS Gateway Router Installation Guide, please ask here and describe the problem in detail.

ufiSpace S9600-72XC Router Installation Guide

UfiSpace S9600-64X 100G Aggregation Router Installation Guide

UfiSpace S9600-32X 100G Aggregation Router Installation Guide

UfiSpace S9501-28SMT Gateway Router Installation Guide














































