UfiSpace S9500-30XS Gateway Router Installation Guide
11 Initial System Setup
Establishing a first‐time serial connection.
To assign an IP address, you must have access to the command line interface (CLI). The CLI is a text‐
based interface that can be accessed through a direct serial connection to the device.
Access the CLI by connecting to the console port. After you assign an IP address, you can access the
system through Telnet or SSH by Putty, TeraTerm or HyperTerminal.
Perform the following steps to access the device through a serial connection:
1. Connect the console cable.
•
•
The console can be connected either with the RJ45 port or the micro USB port, both
ports are labelled IOIO. If connecting with micro USB, drivers will need to be installed.
To connect the console using the RJ45 port, locate the RJ45 port labelled IOIO, then
plug a serial cable into the console port and connect the other end to the computer.
Cable types may vary depending on the model.
Figure 27.
•
To connect the console using the micro USB port, locate the port on the front panel of
the router, then connect your computer using the micro USB cable provided in the
packaging contents. Download the suitable driver for your operating system (OS) using
the URL below:
•
bridge‐ vcp‐drivers
•
Figure 28.
S9500‐30XS Hardware Installation Guide | 20
| General | Details |
|---|---|
| Name | UfiSpace S9500-30XS Gateway Router Installation Guide |
| Make | UfiSpace |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.75 MB |
If you have any questions regarding UfiSpace S9500-30XS Gateway Router Installation Guide, please ask here and describe the problem in detail.

ufiSpace S9600-72XC Router Installation Guide

UfiSpace S9600-64X 100G Aggregation Router Installation Guide

UfiSpace S9600-32X 100G Aggregation Router Installation Guide

UfiSpace S9501-28SMT Gateway Router Installation Guide














































