ADVANTECH ICR-3200 Cellular Router Instruction Manual
ICR-3200
4.20 Automatic Update Configuration
Use the Automatic Update menu to configure the automatic update settings. The router can
be configured to automatically check for firmware and configuration updates from a HTTP(S)
or FTP(S) server. IPv6 sites/servers are supported. Used protocol is specified by an address
in Base URL field: HTTP, HTTPS, FTP or FTPS. To prevent possible unwanted manipulation
of the files, the router verifies that the downloaded file is in the tar.gz format. At first, the format
of the downloaded file is checked. Then the type of architecture and each file in the archive
(tar.gz file) is checked.
If the Enable automatic update of configuration option is selected, the router will check if
there is a configuration file on the remote server, and if the configuration in the file is different
than its current configuration, it will update its configuration to the new settings and reboot.
If the Enable automatic update of firmware option is checked, the router will look for a new
firmware file and update its firmware if necessary.
Item
Description
Base URL
Base URL, IPv4 or IPv6 address from which the configuration file will
be downloaded. This option also specifies the communication protocol
(HTTP, HTTPS, FTP or FTPS (only implicit mode is supported)), see
examples below.
Unit ID
Name of configuration (name of the file without extension). If the Unit
ID is not filled, the MAC address of the router is used as the filename
(the delimiter colon is used instead of a dot.)
Update Hour
Use this item to set the hour (range 1-24) when the automatic update
will be performed every day. If the time is not specified, automatic up-
date is performed five minutes after turning on the router and then
every 24 hours. If the detected configuration file is different from the
running one, it is downloaded and the router is restarted automatically.
Decryption
Password
Password for decryption of crypted configuration file. This is required
only in case the configuration is encrypted.
Update Window Choose an hour (range from 1 to 24) when the automatic update will
Start
be performed on a daily basis.
If the time is not specified (set to dynamic), the automatic update is
performed five minutes after router boots up and then regularly every
24 hours.
Update Window This value defines the period within the update will be done.
Length
This period starts at the time set in the Update Window Start field.
The exact time, when the update will be done, is generated randomly.
Table 75: Automatic Update Configuration
151
| General | Details |
|---|---|
| Name | ADVANTECH ICR-3200 Cellular Router Instruction Manual |
| Make | Advantech |
| Language | English |
| Filetype | PDF (Download) |
| File size | 3.17 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding ADVANTECH ICR-3200 Cellular Router Instruction Manual, please ask here and describe the problem in detail.
ADVANTECH ICR-2701 Engineering Portal Cellular Router User Guide
ADVANTECH ICR-2531 LTE Router User Manual
advantech ICR-3831 RAILWAY 4G LTE ROUTER & GATEWAY User Guide
ADVANTECH SL302 SmartStart LTE Router User Manual
ADVANTECH ICR-2431 LTE Router User Manual
ADVANTECH ICR-2041 LTE Router User Manual
TP-Link Archer C86 MU-MIMO Wi-Fi Router Installation Guide
MikroTik RBwAPG-5HacD2HnD Wireless Router User Guide
TP-Link Archer AX72 AX5400 Wi-Fi 6 Router Installation Guide
NETGEAR RS700S Nighthawk Tri-Band WiFi 7 Router User Guide
LANCOM 883+ VoIP Single Site Router Installation Guide
Pix-Link AX02 Wi-Fi 6 Router Installation Guide
LINOVISION IOT-R32W Unlocked 4G LTE Router User Manual
triton TWX7 Router Table Module Instruction Manual
robustel R1520LG Dual SIM LTE Router User Manual
Ubiquiti UMR-Ultra Mobile Router Installation Guide