ADVANTECH ICR-3200 Cellular Router Instruction Manual
ICR-3200
The cellular router will not operate unless the cellular carrier has been correctly config-
ured and the account activated and provisioned for data communications. For UMTS
and LTE carriers, a SIM card must be inserted into the router. Do not insert the SIM card
when the router is powered up.
You may use the web interface to monitor, configure and manage the router. To access the
router over the web interface enter the router’s IP address in your browser. The default address
is 192.168.1.1. Only access via secured HTTPS protocol is permitted. So the syntax for the IP
address must be https://192.168.1.1. When accessing the router for the first time you will need
to install a security certificate if you don’t want the browser to show you a domain disagreement
message. To avoid receiving domain disagreement messages, follow the procedure described
in the following subchapter.
The default username is root1. The default password is printed on the router’s label.2
Change the default password as soon as possible!
For increased security of the network connected to the router, change the default router
password. When the default password of the router is still active, the Change password
title is highlighted in red.
After three unsuccessful login attempts, any HTTP(S) access from an IP address is
blocked for one minute.
When you successfully enter login information on the login page, the web interface will be
displayed, see Figure 2. The left side of the web interface contains a menu tree with sections
for Status monitoring, Configuration, Customization, and Administration of the router.
The Name and Location fields, identifying the router, can be displayed in the right upper corner
of the web interface. It can be configured in the SNMP configuration (see 4.17.6).
2.1 Factory Reset
After the PWR LED starts to blink you may restore the initial router settings by pressing the
reset (RST) button for a given time, see the technical manual of the router for more information.
This action will revert all the configuration settings to the factory defaults and the router will
reboot (the PWR LED will be on during the reboot).
1ICR-3241(W)-1ND models have the defaul username "admin".
2If the router’s label does not contain a unique password, use the password "root".
7
| General | Details |
|---|---|
| Name | ADVANTECH ICR-3200 Cellular Router Instruction Manual |
| Make | Advantech |
| Language | English |
| Filetype | PDF (Download) |
| File size | 3.17 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding ADVANTECH ICR-3200 Cellular Router Instruction Manual, please ask here and describe the problem in detail.
ADVANTECH ICR-2701 Engineering Portal Cellular Router User Guide
ADVANTECH ICR-2531 LTE Router User Manual
advantech ICR-3831 RAILWAY 4G LTE ROUTER & GATEWAY User Guide
ADVANTECH SL302 SmartStart LTE Router User Manual
ADVANTECH ICR-2431 LTE Router User Manual
ADVANTECH ICR-2041 LTE Router User Manual
CNCU CoreDraw Plugin For Router User Guide
Synology WRX560 Wifi Router User Manual
DrayTek Vigor2762 Series ADSL2-2+ and VDSL2 Router User Guide
CP PLUS CP-GR-DE413-S Dual-Band 4G Router Installation Guide
NEXXT NCM-C1200 Bolt AC 1200 Router User Guide
Tenda AC1200 WiFi 6 Router Installation Guide
D-Link AX3200 Router Owner’s Manual
TP-Link ER7212PC Omada 3-in-1 Gigabit VPN Router Owner’s Manual
ZYXEL LTE3301-PLUS 4G LTE-A Router User Guide
airlive XPON ONU Wifi6 MESH Router User Manual