ADVANTECH ICR-3200 Cellular Router Instruction Manual
ICR-3200
Item
Description
DHCP Client
Enables/disables the DHCP client function. If in IPv6 column, the
DHCPv6 client is enabled. DHCPv6 client supports all three meth-
ods of getting an IPv6 address – SLAAC, stateless DHCPv6 and
statefull DHCPv6.
• disabled – The router does not allow automatic allocation of
an IP address from a DHCP server in LAN network.
• enabled – The router allows automatic allocation of an IP
address from a DHCP server in LAN network.
IP Address
A fixed IP address of the Ethernet interface. Use IPv4 notation in
IPv4 column and IPv6 notation in IPv6 column. Shortened IPv6
notation is supported.
Subnet Mask / Prefix Specifies a Subnet Mask for the IPv4 address. In the IPv6 column,
fill in the Prefix for the IPv6 address – number in range 0 to 128.
Default Gateway
Specifies the IP address of a default gateway. If filled-in, every
packet with the destination not found in the routing table is sent to
this IP address. Use proper IP address notation in IPv4 and IPv6
column.
DNS Server
Specifies the IP address of the DNS server. When the IP address
is not found in the Routing Table, the router forwards the request
to DNS server specified here. Use proper IP address notation in
IPv4 and IPv6 column.
Table 13: Configuration of the Network Interface – IPv4 and IPv6
The Default Gateway and DNS Server items are only used if the DHCP Client item is set
to disabled and if the ETH0 or ETH1 LAN is selected by the Backup Routes system as the
default route. (The selection algorithm is described in section 4.7). Since FW 5.3.0, Default
Gateway and DNS Server are also supported on bridged interfaces (e.g. eth0 + eth1).
The following three items (in the table below) are global for the configured Ethernet inter-
face. Only one bridge can be active on the router at a time. The DHCP Client, IP Address
and Subnet Mask / Prefix parameters of the only one of the interfaces are used to for the
bridge. ETH0 LAN has higher priority when both interfaces (ETH0, ETH1) are added to the
bridge. Other interfaces can be added to or deleted from an existing bridge at any time. The
bridge can be created on demand for such interfaces, but not if it is configured by their respec-
tive parameters.
28
| General | Details |
|---|---|
| Name | ADVANTECH ICR-3200 Cellular Router Instruction Manual |
| Make | Advantech |
| Language | English |
| Filetype | PDF (Download) |
| File size | 3.17 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding ADVANTECH ICR-3200 Cellular Router Instruction Manual, please ask here and describe the problem in detail.
ADVANTECH ICR-2701 Engineering Portal Cellular Router User Guide
ADVANTECH ICR-2531 LTE Router User Manual
advantech ICR-3831 RAILWAY 4G LTE ROUTER & GATEWAY User Guide
ADVANTECH SL302 SmartStart LTE Router User Manual
ADVANTECH ICR-2041 LTE Router User Manual
ADVANTECH ICR-2431 LTE Router User Manual
ASUS RT-AX88U Pro AX6000 Dual Band Wi-Fi Router User Guide
TP-Link Archer BE900 BE24000 Quad-Band Wi-Fi 7 Router User Guide
Dynalink DL-WRX36 WiFi 6 AX3600 Router User Guide
TP-Link AC1900 Wireless MU-MIMO Wi-Fi Router Instruction Manual
AntennaGear TX54 5G Dual Cellular Router Owner’s Manual
ZTE MC801A 5G WiFi CPE Router User Manual
Newland NL-81 Router User Manual
ASUS EBR63 Wireless AX3000 Dual Band Router User Guide
ZYXEL NETWORKS 2AU6R03993 Security Router User Guide
D-Link M30 Wi-Fi 6 Mesh Router User Guide