Home > Advantech > ADVANTECH ICR-3200 Cellular Router Instruction Manual

ADVANTECH ICR-3200 Cellular Router Instruction Manual

ICR-3200  
Continued from previous page  
Description  
Item  
First Local Subnet  
Mask/Prefix  
IPv4 subnet mask of a local network, or IPv6 prefix (single num-  
ber 0 to 128).  
Second Local Subnet IPv4 or IPv6 address of the second local network, based on Tun-  
nel IP Mode above. For IKE Protocol = IKEv2 only.  
Second Local Subnet IPv4 subnet mask of the second local network, or IPv6 prefix  
Mask/Prefix  
(single number 0 to 128). For IKE Protocol = IKEv2 only.  
Local Protocol/Port  
Specifies Protocol/Port of a local network. The general form is  
protocol/port, for example 17/1701 for UDP (protocol 17) and  
port 1701. It is also possible to enter only the number of protocol,  
however, the above mentioned format is preferred.  
MTU  
Maximum Transmission Unit value (for route-based mode only).  
Default value is 1426 bytes.  
Remote Virtual  
Network  
Specifies virtual remote network for server (responder).  
Remote Virtual Mask  
Specifies virtual remote network mask for server (responder).  
Local Virtual Address Specifies virtual local network address for client. To get address  
from server set up the address to 0.0.0.0.  
Cisco FlexVPN  
Enable to support the Cisco FlexVPN functionality. The route-  
based type must be chossen. For more information, see  
strongswan.conf page.  
Encapsulation Mode  
Specifies the IPsec mode, according to the method of encapsu-  
lation.  
tunnel – entire IP datagram is encapsulated.  
transport – only IP header is encapsulated. Not supported by  
route-based VPN.  
beet – the ESP packet is formatted as a transport mode packet,  
but the semantics of the connection are the same as for tunnel  
mode.  
Force NAT Traversal  
Enable NAT traversal enforcement (UDP encapsulation of ESP  
packets).  
IKE Protocol  
IKE Mode  
Specifies the version of IKE (IKEv1/IKEv2, IKEv1 or IKEv2).  
Specifies the mode for establishing a connection (main or ag-  
gressive). If you select the aggressive mode, then the router es-  
tablishes the IPsec tunnel faster, but the encryption is perma-  
nently set to 3DES-MD5. We recommend that you not use the  
aggressive mode due to lower security!  
Continued on next page  
99  
GeneralDetails
NameADVANTECH ICR-3200 Cellular Router Instruction Manual
MakeAdvantech
LanguageEnglish
FiletypePDF (Download)
File size3.17 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

If you have any questions regarding ADVANTECH ICR-3200 Cellular Router Instruction Manual, please ask here and describe the problem in detail.

Leave a Reply

Your email address will not be published. Required fields are marked *

17 − 4 =

ADVANTECH ICR-2701 Engineering Portal Cellular Router User Guide
ADVANTECH ICR-2701 Engineering Portal Cellular Router User Guide
ADVANTECH ICR-2531 LTE Router User Manual
ADVANTECH ICR-2531 LTE Router User Manual
advantech ICR-3831 RAILWAY 4G LTE ROUTER & GATEWAY User Guide
advantech ICR-3831 RAILWAY 4G LTE ROUTER & GATEWAY User Guide
ADVANTECH SL302 SmartStart LTE Router User Manual
ADVANTECH SL302 SmartStart LTE Router User Manual
ADVANTECH ICR-2431 LTE Router User Manual
ADVANTECH ICR-2431 LTE Router User Manual
ADVANTECH ICR-2041 LTE Router User Manual
ADVANTECH ICR-2041 LTE Router User Manual

ADVANTECH ICR-3200 Cellular Router Instruction Manual